668440

Elma 5800 Manual

46
Zoom out
Zoom in
Previous page
1/52
Next page
Elma 5800 side 46
RECALL function
Press STORE button two seconds to enter into RECALL function.
On the left upper corner shows XXXX ，which states current storage serial number. On
the right upper corner shows XXXX ，which states how many current storage is used.
Use button + & —to select serial number XXXX on the left upper corner and record data
on the right upper corner.
To finish above RECALL function, press EXIT button.
Parameter setting up（
（（
（SET）
））
）
1. Press the RANGE button second seconds to enter into SET
function. Then press shortly once, change on setting content.
Setting content includes(in sequence)：
A: upper limit buzzer alarm
B: lower limit buzzer alarm
C: auto power off time
D: turn off phonating
E: back lit time
Use ←
、
+
、
-
、
→ buttons to select the parameter
2. Press SET button continuously to switch to setting content, till exiting set up to
testing mode. So the updated setting content is saved. If press EXIT button in this
period, all setting cann’t be saved.
AC+DC
In all the measuring mode VAC,mV(AC),10A(AC),mA(AC),uA(AC), press button EXIT for
2seconds to enters into AC+DC testing. The precision is the same as AC measure. LCD
shows AC+DC signal. Press button EXIT to exit.
Low battery indication
When the icon appears alone in the display , the battery should be replaced.
Maintenance
WARNING: To avoid electric shock, disconnect the test leads from any source of voltage
before removing the back cover or the battery or fuse covers.
WARNING:To avoid electric shock, do not operate your meter until the battery and fuse
covers are in place and fastened securely.
This MultiMeter is designed to provide years of dependable service, if the following care
instructions are performed:
1. KEEP THE METER DRY. If it gets wet, wipe it off.
2. USE AND STORE THE METER IN NORMAL TEMPERATURES. Temperature
extremes can shorten the life of the electronic parts and distort or melt plastic parts.
3. HANDLE THE METER GENTLY AND CAREFULLY. Dropping it can damage the
electronic parts or the case.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elma 5800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elma 5800 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info