668440

Elma 5800 Manual

45
Zoom out
Zoom in
Previous page
1/52
Next page
Elma 5800 side 45
Peak Hold
The Peak Hold function captures the peak AC or DC voltage or current. The meter can
capture negative or positive peaks as fast as 1 millisecond in duration. Momentarily press
the PEAK button, “PEAK” and “MAX” will display in left auxiliary display. MIN” will display
in right auxiliary display. The meter will update the dispay each time a lower negative peak
occurs. Press the EXIT button to exit the Peak Hold mode. Auto Power Off feature will be
disabled automatically in this mode.
Data record STORE/RECALL ）
））
）
STORE function
In the current testing mode, press STORE button one time, enter into STORE function. it
will show “STO” on the left side on the display and XXXXs on the upper left corner
If XXXXs is 0000s, it will enter Manual Recording Function mode; If XXXXs is not 0000s, it
enters Automatic Recording Function mode, XXXXs indicates the recording interval time;
using button + & - to select，the range is 0~255 seconds。
After setting the mode, press STORE button one time again to start recording, it will show
“STO” on the left side on the display and NO XXXX on the upper left corner.
If setting in the Manual Recording mode, press STORE button to keep the current
measured reading; If setting in the Automatic Recording mode, the data will be
automatically stored every XXXXs. Then press EXIT button to return to the normal
measurement.
Keep pressing STORE button to view the memory data. The current storage serial number
is showed on the left upper corner and the stored data corresponding to the serial number
is showed on the right upper corner. Then press EXIT button to return to the normal
measurement.
How to clear the memory data?
Set the switch to the OFF position, keep pressing the SETUP button and then turn the
switch from OFF to any other position, the display will show RCL, release the SETUP
button, then all the memory data will be cleared.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elma 5800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elma 5800 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info