741487

Elkron MP110MTG Manual

9
Zoom out
Zoom in
Previous page
1/20
Next page
(((ELKRON)))
MP110 USER MANUAL
(((ELKRON)))
MP110 USER MANUAL
4.Sensor EXCLUDED/Re-entry
1. Enter the Master user code and press the
E
key.
2. The first sensor available for EXCLUDED is proposed. The message
“INSULATION Z nn” appears on the display (where nn refers to the
number of the sensor, see the sensor table to know to which zone it
corresponds).
3. Use the
1
key to forward scroll the list of sensors..
Use the
2
key to backward scroll the list of sensors.
Use the
TOTAL
key to return to the beginning of list.
4. To EXCLUDED the sensor under consideration, press
E
.
The message “ZONE nn INSULAT” appears on the keypad screen.
If all the sensors are EXCLUDED, the message “ALL ZONES
INSULAT” will appear on the LCD display.
5. Press
EXIT
F
to exit the programming function.
1. Enter the Master user code and press the
O
key.
2. Re-entry of the first EXCLUDED sensor is proposed with the message
“SETTING ZONE nn” (where nn is the number of sensor, refer to the
sensor table to know to which zone it corresponds).
3. Use the
1
key to forward scroll the list of EXCLUDED sensors.
Use the
2
key to backward scroll the list of EXCLUDED sensors.
Use the
TOTAL
key to return to the beginning of the list.
4. To include the zone under examination, press
O
5. The message “ZONE nn SETTED” will appear on the keypad screen.
To select the next zone, press the
1
or
2
key. The message
“ALL ZONES SETTED” will appear on the display if there are no
EXCLUDED zones.
6. Press
EXIT
F
to exit the programming function.
4.1 Sensor EXCLUDED
4.2
Re-entry of Previously EXCLUDED Sensors
9
2.
Electronic Key Programming
SYSTEM MANAGEMENT WITH
ELECTRONIC KEY
DK2000M
1.Commutator Description
ON = alarms stored, low battery,
absence of mains, system
failures, tampering
SLOW FLASHING =
during key programming and to
signal open inputs. In case of
concomitance of stored alarms,
failure, etc. with open inputs, the
led flashing will be fast.
ON = ZONE 1 ARMED
OFF = ZONE 1 DISARMED
ON = ZONE 2 ARMED
OFF = ZONE 2 DISARMED
ON = ZONE 3 ARMED
OFF = ZONE 3 DISARMED
Once your system has been installed, if management by electronic key
is foreseen, the unit must acquire the keys that you intend to use. We
recommend performing the first storage in the presence of the engineer.
Keys can be stored in three different ways:
- STORAGE OF A NEW KEY
For storing a key code in a new system or changing the code of all
keys in case one key is lost
- ADDING A KEY
For adding one or more keys to an existing system
KEY CODE DUPLICATION
For storing a key code in a second system by copying it from a
previously programmed key. With this function it is possible to check
one or more systems with a single key. For example, the home system
and the office system will both recognize the same key (without
needing to use 2 different keys).
CHECK OF STORED KEYS
For checking previously programmed keys, by verifying correctness
of code, the key number and the zones controlled.
32
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron MP110MTG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron MP110MTG in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron MP110MTG

Elkron MP110MTG User Manual - German - 32 pages

Elkron MP110MTG User Manual - French - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info