Manual Elkron MP110 (page 15 of 20) (English)

741484

Zoom out

Zoom in

1/20

(((ELKRON)))

MP110 USER MANUAL

(((ELKRON)))

MP110 USER MANUAL

10. Call Result Visualization

1. Further to an alarm, this procedure allows to verify which telephone

numbers have been called and which of them have properly answered.

2. Enter MASTER code +

3. The following message is visualized:

“

#:nnnnnn*:nnnnnn

” where n=the corresponding telephone number.

The first group of numbers (left) identifies the called numbers, the right

group the numbers that have properly answered.

In the following example, all numbers have been called and all of them

have properly answered: #:123456*:123456.

In the following example numbers 2,4,5,6 have been called by only

numbers 2,5,and 6 have properly answered: #:-2-456*:2—56.

4. In case of information lack the displays will visualize the following

messages: #:________*:_________

5. To cancel information press key

6. To exit from procedure, press key

EXIT

twice.

11. Listening to Voice Messages

• Listening takes place by means of the loudspeaker connected to the

voice board in the control unit

1. Enter the MASTER USER access code

2. Press keys

TEL

3. Press the

key to begin to reproduce the messages recorded, the

system returns to the communicator menu after all messages have been

heard.

4. If one wishes to listen to a particular message, use the

keys to select the desired message and start reproducing with the

key

5. After messages have been played reproduced, it is possible to select

the next message. Press

EXIT

to exit the message play back procedure

and return to the communicator menu.

- Press the

key, followed by

key .

- The display visualizes the following information in sequence approx.

every 1 second:

• flashing: ‘hours’ from 00 to 12.

• flashing: ‘minutes’ from 00 a 59.

• exits from procedure.

5.4 Time Visualization

5.6 Display of EXCLUDED Sensors

• One or more open zones are indicated by the flashing of the

led. To display these, press the

key.

• The number “nn” is displayed (where nn is the number of the sensor,

refer to the sensor table to know to which zone it correspsonds)

5.3 Display of Open Zones

• One or more EXCLUDED sensors are indicated by the flashing of the

led.

• To display the EXCLUDED sensors, type in the USER 1 code and press

the

key.

• The first EXCLUDED zone is displayed with “nn” (where nn is the number

of the sensor, refer to the sensor table to know to which zone it

corresponds)

- Press the

key, followed by

key .

- The display visualizes the following information in sequence approx.

every 1 second:

• nn flashing, where nn = day of the month.

• nn where nn = month from 1 to 12.

• nn flashing, where nn = year from 00 to 99 (00=2000,

01=2001, etc.)

• exits from procedure.

5.5 Date Visualization

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elkron MP110 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron MP110

Elkron MP110 User Manual - German - 32 pages

Elkron MP110 User Manual - French - 120 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elkron MP110 Manual

Product: