741402

Elkron IT500WEB Manual

14
Zoom out
Zoom in
Previous page
1/40
Next page
14/40
STEP 4 - Configuring cameras (Skip if there are no cameras)
WARNING! Even if TC19 (80TC1U00133) and TC20 (80TC1V00133) cameras are
branded Elkron, they must be configured as “OTHER” cameras. For configuration, refer
to “STEP 5”.
1. Use the CDRom included in the camera package and insert it in your PC slot, then install the IP
Discovery software. Launch the application that will search for and display the cameras available
in the wired LAN (or WI-FI) network. Select and click on an IP address from the displayed list of
cameras, then press the CONNECT button. After establishing a connection with a camera, you
will be prompted to type a user name and password for that camera (factory username: admin,
Psw: admin). Then, the camera image will be displayed on the screen.
2. Together with the image, a menu will be shown from which to select the "Settings" "Network"
"General" items and then set the Static IP Netmask Gateway and (if they are known)
the network DNS, too. Save and exit the menu.
3. Enable the technical code on the control panel (factory setting 000000), and from the Master
Code, the "REMOTE ACCESS" option.
4. From your PC close down IP Discovery and open the application Hi-connect.
5. Select Manage Systems.
6. On the list of systems, select the concerned system and then Open to Manage.
7. Select the “Web Server” TAB.
8. Check that the present connection mode is the required one (e.g. LAN (IT500WEB Local) –
192.168.xxx.xxx:xxxx).
9. Select “Connect”.
10. After a connection is established, the green dot in the dialogue box will illuminate: select from the
displayed menu the item Cameras, by ticking the fields in the Hi-connect window, the
camera NUMBER, TYPE (Elkron/other) and ADDRESS (static IP or dynamic DHCP). Save
your settings by clicking the icon shaped like a "floppy disk".
11. The factory physical IP address of the cameras is 192.168.1.200.
12. Repeat the same setting procedure for all the other cameras concerned and/or present by setting
a different or suitable IP address.
13. After completing the procedure, save by clicking the "floppy disk" icon and then "TRANSFER".
14. At this point, the WEB server board will restart automatically reading "Restarting. Please wait".
15. Wait approximately 6 minutes for the reboot; at the end, the following confirmation message will
appear: Procedure correctly completed press OK.
Re-connecting will then be performed automatically; log out and close down Hi-connect.
16. Access the browser of your PC for connection to the Web server, open the web page, log in
(with the credentials of the Web Server board) and click on the item Video surveillance
Video cameras to check image viewing via the cameras connected to the system.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron IT500WEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron IT500WEB in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info