741402
15
Zoom out
Zoom in
Previous page
1/40
Next page
15/40
STEP 5 - OTHERcamera configuration (non-Elkron cameras)
WARNING! To install non-Elkron (OTHER) cameras, check that they can reply to a
HTTP request providing a snapshot in JPEG format with maximum resolution 1280x720.
Note: Use of Static IPis recommended.
For example, URMET BOOST cameras can be used (models: 1093/139M2 1093/141M2
1093/142M2 1093/176M2 1093/177M2 1093/178M2).
The following instructions are valid also for Elkron TC19 (80TC1U00133) and TC20 (80TC1V00133)
cameras.
Proceed as follows, if these cameras are used:
WARNING! Check that the camera firmware is 1.1.9 or higher. If the camera firmware
version is lower, contact Customer Service (mail: stac@elkron.it and ask for an update).
WARNING! Check that the Web Server firmware is 2.0 or higher. If the Web Server
firmware is lower, download the update from the Elkron website.
WARNING! Make sure you have the latest versions of IP-Connect (V1.10 or higher) or Hi-
Connect (V3.70 or higher). If the versions are not up-to-date, download the update from
the Elkron website.
1. Connect the LAN cable to the camera directly to the PC.
2. Prepare and set up the following IP address and network parameters on the PC:
IP:192.168.1.10 -- Subnet Mask: 255.255.255.0
Note: The default IP address of the camera is 192.168.1.168
3. Using Internet Explorer access the camera programming
(192.168.1.168, user name: admin, password: admin)
4. Set IP address, Subnet Mask and Gateway (to select the default IP address, Subnet Mask
and Gateway of the camera, connect to the router of your network and check the IP
address mode).
5. Select main stream resolution to 1280 x 720, save and quit.
6. Connect the camera to your network.
7. Reset the PC network parameters for operation on your network.
8. Start Hi-Connect or IP-Connect.
9. Configure the camera (see Step 4)
10. Set the following programming parameters:
IP address
User Name and Password
In “Full Image URL” enter the following string:
“/Snapshot/1/RemoteImageCapture?ImageFormat=2”
In “Image URL” enter the following string:
“/Snapshot/1/RemoteImageCapture?ImageFormat=2”
Save and transfer the programming to the Web Server.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron IT500WEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron IT500WEB in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info