741458

Elkron 80TC1L00133 Manual

84
Zoom out
Zoom in
Previous page
1/248
Next page
DS80TC1L-001 84
4.5.7 Power On Action Submenu Of Motion Submenu
Option Value Explanation
ACTION
NONE/PRESET/VECTORSCAN/
PATTERN/PANSCAN/AUTOSCAN/AUTO
TRACK
This option allows to select the action to be activated.
The AUTO TRACK function is available only on
Ref. 80TC1L00133 and 80TC9K00133.
NUMBER
PRESET: 1/255
VECTORSCAN: 1/6
PATTERN: 1/3
PANSCAN: 1
AUTOSCAN: 1
This option allows to define in detail which single action
has to be activated. The single action number that can be
selected changes according to the previously selected
action (from 1 to 255, except the not programmable ones
for the Presets; from 1 to 6 for VectorScan; from 1 to 3
for Patterns, 1 for PanScan, 1 for AutoScan). The
selection of the desired number is possible by pressing
the button IRIS+ and going to the respective screen.
4.5.8 Limit Operation Submenu Of Motion Submenu
This option allows you to select the limits of use of the Dome. Spreader is indicated through the space coordinates within
which the Dome is enabled to move in as it is possible to discriminate the vision areas of less interest or forbidden to
take pictures.
Option Value Explanation
START POSITION 0,0 ÷ 359,9 ÷ 0,0 ÷ 90,0
This option allows to store the PAN/TILT start position
coordinates for the zone. By pressing IRIS+ and selecting with
the arrow buttons the end position frame to be stored for the
zone, it is possible to see on the monitor also the coordinates
of the displayed frame. Press again IRIS+ to confirm the zone
start position storing.
END POSITION 0,0 ÷ 359,9 ÷ 0,0 ÷ 90,0
This option allows to store the PAN/TILT zone final
coordinates. By pressing IRIS+ and selecting with the arrow
buttons the end position frame to be stored for the zone, it is
possible to see on the monitor also the coordinates of the
displayed frame. Press again IRIS+ to confirm the storing of
the zone end position.
DIRECTION LEFT/RIGHT
This option allows to select the motion direction of the Dome
(Left, Right).
OPERATION ON/OFF If set to ON, this option allows to activate the function.
POWER ON ACTION
1 Action Preset
2 Number 1
LIMIT OPERATION
1 Start Position 0.0
2 End Position 0.0
3 Direction Right
4 Operation OFF
… 84 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC1L00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC1L00133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info