741458

Elkron 80TC1L00133 Manual

83
Zoom out
Zoom in
Previous page
1/248
Next page
DS80TC1L-001 83
4.5.5.9 MOTION submenu of FUNCTION PROGRAMMING menu
Option Value Explanation
PARK ACTION
This option allows to define which action must be performed when
an automatic function stops/is interrupted (see below and see the
example).
POWER ON ACTION
This option allows to define which command must be executed
when the Dome power-on procedure is completed (see below).
LIMIT OPERATION
This option allows to reduce the Dome operation limit, according
to the previously indicated action to be automatically performed
(see below).
AUTO TRACKING
SETUP
This menu establishes object autotracking mode (Autotracking
available only on Ref. 80TC1L00133 and 80TC9K00133).
4.5.6 PARK ACTION submenu of MOTION submenu
Option Value Explanation
ACTION
NONE/PRESET/VECTORSCAN/
PATTERN/PANSCAN/AUTOSCAN/
REPEATLAST/AUTO TRACK
This function permits selection of the action to be activated at
device power-on. The AUTO TRACK function is available only
on Ref. 80TC1L00133.
WARNING: the action selected will be performed only if PARK
ACTION (see previous programming) is other than REPEAT
LAST. If PARK ACTION is equal to REPEAT LAST, the action
relating to REPEAT LAST will be performed at power-on.
NUMBER
PRESET: 1/255
VECTORSCAN: 1/6
PATTERN: 1/3
PANSCAN: 1
AUTOSCAN: 1
This option allows to define in detail which single action has to
be activated. The single action number that can be selected
changes according to the previously selected action (from 1 to
200, except the not programmable ones for the Presets; from 1
to 6 for VectorScan; from 1 to 3 for Patterns, 1 for PanScan, 1
for AutoScan). The selection of the desired number is possible
by pressing the button IRIS+ and going to the respective
screen.
PARK TIME 1/999
This value defines the time (in seconds) after which the PARK
ACTION is activated. When this time is elapsed, the Dome will
restart with the configured function (ACTION).
EXAMPLE
A typical application example is the use of the Pattern in case of an alarm.
After an alarm activated by the opening of a door, the ELKDome will immediately stop the operation in progress and will
immediately execute the previously programmed Pattern, associated to the activated alarm.
When the Pattern execution is completed, after a fixed time (Park Time), the dome will start again the action interrupted
by the alarm.
MOTION
1 Park Action
2 Power On Action
3 Limit Operation
4 Auto Tracking Setup
PARK ACTION
1 Action Preset
2 Number 1
3 Park Time ----
… 83 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC1L00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC1L00133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info