646319
30
Zoom out
Zoom in
Previous page
1/49
Next page
30 of 49
Commissioning
Gas changeover
Changeover from natural gas to
liquid gas (LPG)
1. Disconnect the boiler from the
mains.
2. Shut the gas Isolation valve
3. Removing the boiler casing
4. Dismantle the mixing channel by
loosening the 3 screws (1).
Disconnect the electrical
Connections of the fan (3) and the
gas valve (4). Remove the air
intake hose (5).
5. Separate the gas valve from the
venturi by removing the 4 screws.
6. Install the gas injector (contained in
changeover kit), as shown in the
preceding illustrations.
7. Reinstall the ventilator/venturi
gauge/gas valve group in the
boiler.
8. Install the air screen (see chart
page 31) for liquid gas (contained
in changeover kit) on the left of the
heat exchanger.
The air screen is on the left of the heat
exchanger.
9. Connect the appliance to the
mains.
10. Open the gas isolation valve
11. Put the appliance into operation
according to the information in the
Instruction manual.
12. Check the gas seals.
13. Replace the front panel of the
combustion chamber.
14. Carry out a combustion analysis
and a calibration of the maximum
heat load.
15. Replace gas shield.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elco MHS - EURON 24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elco MHS - EURON 24 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info