646319
29
Zoom out
Zoom in
Previous page
1/49
Next page
29 of 49
Commissioning
Parameters
Reading parameters only
Reading of the boiler parameters is
done by means of the SELECT (7)
key
Keep the SELECT key (7)
pears on the
display (about 5 secs)
release the key.
Press the key again until "bO"
appears on the display (approx 5
secs.)
Release the key.
Now each time the key is
pressed, the display shows the
parameters shown on the right.
When finished Keep the key
pressed tillfor approx 4 secs, until
the display shows "-.-."
Release the key.
The display now reverts to the
standard readout (heating flow
temperature).
Note: The display reverts to the
normal readout if no buttons are
pressed or adjustments made for
approx 8 minutes.
The only accessible reading
parameters are the following:
A0 Current fault readouts
A1 Boiler flow temperature reading
(°C)
A2 Service water temperature
reading(°C)
A3 not used
A4 Reading for operating phase of
boiler.
b0 Internal code in case of fault.
b1 Boiler return temperature reading
(°C)
b3 Reading of flue gas sensor
temperature
b4 Reading of outside temperature
(°C)
b5 not used
b6 not used
b7 Temperatuere of circuit of second
zone (°C)
b8 not used
b9 not used
C1 Reading for ionisation current (u.)
C2 Reading for ventilator revolutions
figure (thousands and hundreds)
C3 PWM fan (%)
C4 Reading of relative heating
appliance heat output (%)
C5 not used
C6 not used
C7 not used
d1 Setpoint, calculated according to
type of operation, service water
or heating operation.
d2 Value of calculated heating flow
temperatures (°C)
d3 Readout of set room temperature
value (°C) If no external/ambient
sensor is available, the value is
set at 20 °C
d4 Adjustment of value of service
water temperature (°C)
d5 not used
d6 Maximum fan speed in heating
operation (thousands and
hundreds)
d7 not used
d8 not used
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elco MHS - EURON 24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elco MHS - EURON 24 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info