213833

Eizo flexscan hd2442w ts Manual

30
Zoom out
Zoom in
Previous page
1/46
Next page
30
Chapter 3 Troubleshooting
(PC Input Signal)
Problems Possible cause and remedy
1. No Picture
• Power indicator does not light up.
• Check whether the power cord is correctly connected.
• Press
on the remote control or touch
of the
operation switch
.
• Power indicator lights in orange.
• Switch the input signal with [INPUT SELECT]
( ) on
the remote control or of the operation switch.
• Press a key on the keyboard or click the mouse.
• Turn on the PC.
• Power indicator lights in blue. • Check whether the PC is properly connected to the
monitor.
• Check the gain setting.
2. The message below appears.
These messages appear when the input signal is incorrect
even if the monitor is functioning.
• The message below shows that the input signal is
out of the specied frequency range. (Such signal
frequency is displayed in red.)
Example:
• Change the mode appropriately using the graphics
board’s utility software. Refer to the manual of the
graphics board for details.
3. The image is not displayed in correct resolution
even if Auto Screen Adjust is performed.
• The resolution of the input signal is not recognized
correctly and the image is displayed shrunk or
distorted.
• Adjust <Resolution> from the <Screen> menu so that
the input signal resolution equals the resolution in the
<Resolution> menu.
If the resolution is set, the [Auto Screen Adjust] is
performed again automatically.
4. The screen position is shifted.
• Adjust <Hor.Position/Ver.Position> from the <Screen>
menu. (Refer to page 17.)
• If the problem persists, use the graphics board’s utility
software if available to change the display position.
5.
Vertical bars appear on the screen or a part of the
imageisickering.
• Adjust <Clock> from the <Screen> menu. (Refer to page
16.)
When the resolution is set to 1920 × 1200, the symptom
may not be improved depending on the input signal used
even if the [Clock] adjustment is performed. In this case,
change the resolution to 1600 × 1200, 1920 × 1080, etc.
6. Wholescreenisickeringorblurring. • Adjust <Phase> from the <Screen> menu. (Refer to
page 17.)
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eizo flexscan hd2442w ts at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eizo flexscan hd2442w ts in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info