GB
12
Notes
Keep the remote control approximately 1 m from
television sets or other electrical appliances. Direct
sunlight may considerably reduce the range of the
remote control.
Objects between the remote control and the IR
receiver which can impede reception of the signal
must be avoided. Handle the remote control with
care. Do not drop it, keep it away from heat and
moisture so as not to damage the remote control.
8. Description of the remote control
functions (Fig. 3/4)
Button assignment
1. TEMP v: Pressing this button reduces the
temperature set for the room.
2. TEMP ^: Pressing this button increases the
temperature set for the room.
3. MODE: Pressing this button allows you to select
the mode for the device. The mode will change
each time you press the button in the following
sequence: AUTO – COOL – DRY – HEAT –
FAN.
4. SWING: Pressing this button will activate the
automatic direction change for the ventilation
flaps. The air flow is adjusted
upwards/downwards. Pressing the button a
second time will stop this function.
5. RESET: Pressing this button deletes all current
settings and returns the device to its default
settings.
6. AIR DIRECTION: Pressing this button enables
you to fix the angle of the ventilation flap.
7. LED DISPLAY: Pressing this button stops the
temperature being shown on the display of the
indoor device. Pressing it a second time will
reactivate the display.
8. FAN SPEED: Pressing this button enables you
to select the fan speed. Each time you press this
button the speed will be switched in the following
sequence:
LOW – MED – HIGH – AUTO.
9. ON/OFF:Pressing this button enables you to
switch on the device. Pressing it a second time
will switch off the device.
10. TIMER ON: Pressing this button enables you to
set the time at which the device will switch on
(0.5 – 24 hours). Each time you press this button
the activation time will move in steps of 30
minutes (steps of one hour after 10 hours). Set
0:00 to deactivate this mode.
11. SLEEP: Pressing this button enables you to
select economy mode. Pressing it a second time
will deactivate this mode. The mode will also be
deactivated as soon as you press another
button. This function can only be used in COOL,
HEAT and AUTO modes.
12. TIMER OFF: Pressing this button enables you to
set the time at which the device will switch off
(0.5 – 24 hours). Each time you press this button
the deactivation time will move in steps of 30
minutes (steps of one hour after 10 hours). Set
0:00 to deactivate this mode.
13. LOCK: Pressing this button locks all current
settings and the remote control will not allow you
to change any more settings. Pressing it a
second time will cancel LOCK mode.
14. TURBO: Not assigned.
Display
21. DIGITAL DISPLAY AREA: The set temperature
will normally be displayed here. If the “Timer On”
or “Timer Off” buttons are pressed, the TIMER
settings will be displayed. Nothing will be
displayed in FAN mode.
22. TRANSFER SIGNAL: This arrow will be lit as
soon as the remote control transfers signals to
the indoor device. The indoor device will then
confirm with a signal tone.
23. ON/OFF: This symbol will go out as soon as the
device has been switched on using the remote
control. It will go out as soon as the device has
been switched off.
24. MODES: As soon as you press the MODE
button, an arrow will appear in front of the mode
that is currently active.
25. LOCK: The LOCK display will be displayed after
you have pressed the LOCK button. If the LOCK
button is pressed a second time the display will
go out.
26. TIMER DISPLAY: As soon as an activation time
has been selected, TIMER ON will appear in this
area. If a deactivation time has been selected,
TIMER OFF will be displayed. If both functions
have been selected, TIMER
ON OFF will be
displayed.
27. FAN SPEED DISPLAY: If you have pressed the
FAN SPEED button, an arrow will appear here
before the currently selected fan speed
(exception: if AUTO speed has been selected, no
arrow will be displayed).
Operating modes
A) AUTO (Automatic) mode
1. Press the MODE button to select AUTO mode.
2. Pressing the TEMP buttons enables you to
select the required room temperature. The most
comfortable temperature settings are between
21°C and 28°C.
