659051

Efco EF 91 C Manual

89
Zoom out
Zoom in
Previous page
1/176
Next page
19EN
from causing tipping up and loss
of control of the vehicle,
particularly on slopes.
5.4.3 Braking
First reduce the machine’s speed by
reducing the engine’s r.p.m., and then
press the brake pedal (
4.21 or 4.31) to
slow down the machine until it stops.
Hydrostatic transmission
The machine already slows down
considerably by just releasing the drive
pedal.
5.4.4 Reverse
IMPORTANT
Reverse must be
engaged only when the machine has
stopped moving.
Mechanical transmission
Press the pedal until the machine stops
and then go into reverse by shifting the
lever sideways and into position «R»
(
4.22). Gradually release the pedal
to engage the clutch and then begin
moving in reverse.
Hydrostatic transmission
When the machine has stopped
moving, start reversing by pressing the
drive pedal in direction «R» (
4.32).
5.4.5 Grass cutting
Model 102
Adjust the position of the anti-chipping
wheels (1) whose function is to reduce
the risk of tearing up sections of lawn,
which can occur when the edge of
the cutting deck drags over irregular
ground.
The four dierent heights of the wheels
allows you to maintain a safe distance
«A» between the cutting deck edge
and the ground.
To change
the position,
unscrew and
remove the
pin (1) then
reposition the
wheel (2) in
the upper and
lower hole of
the wale corresponding to the wheel
diameter.
WARNING!
This should
always be performed on both
wheels, positioning them at the
same height WITH THE ENGINE
OFF AND BLADES DISENGAGED.
To start cutting:
– move the throttle to «FAST»;
– raise the cutting deck as high as
possible;
– only use the blade (
4.7), on grass
lawns, do not use the blades on stony
ground or when the grass is very high.
– start moving forwards on the grass
very slowly and with utmost caution, as
already described;
– regulate the cutting height and speed
(
4.8) considering the conditions of
the lawn (the height, density and
dampness of the grass).
1
A
A = 30 mm
A = 10 mm
A = 20 mm
A = 0 mm
2
1
… 89 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco EF 91 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco EF 91 C in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info