Manual Efco EF 91 C (page 87 of 176) (English, German, Dutch, French, Italian)

659051

Zoom out

Zoom in

1/176

17EN

rinse immediately with water.

The warranty does not cover for

damage to plastic parts of the bodywork

or the engine caused by petrol.

5.3.4 Fitting the exit guards (grass-

catcher or rear discharge guard)

WARNING!

Never use the

machine without having tted the

discharge guards!

Attach the grass-catcher (1) to the

brackets (2) and centre it up with the rear

plate, so that the two reference marks (3)

coincide.

Centering is

ensured by

using the right

bracket as

lateral support.

Make sure

that the lower

pipe of the

grass-catcher

opening is

attached to the

pawl (4).

If you decide

to work without

the grass-catcher, a rear discharge guard

kit is available upon request (

9.2).

This has to be attached to the rear plate

as indicated in the instructions.

5.3.5 Checking machine safety

and eciency

1. Check that the safety devices function

as described (

5.2).

2. Check that the brake is in perfect

working order.

3. Do not start mowing if the blades

vibrate or if you are unsure whether

they are sharp enough. Always

remember that:

– A badly sharpened blade pulls at the

grass and causes the lawn to turn

yellow.

– A loose blade causes unwanted

vibrations and can be dangerous.

WARNING!

Do not use the

machine if you are unsure whether it

is working safely or eciently. If in

doubt, contact your Dealer

immediately to make the necessary

checks and repairs.

5.4 USING THE MACHINE

5.4.1 Starting

DANGER!

The engine must be

started in an open or well-ventilated

area! ALWAYS REMEMBER THAT

EXHAUST GASES ARE TOXIC!

To start the engine:

– open the fuel stopcock (1) (if tted);

– shift in the gear into neutral («N»)

(

4.22 or 4.32);

– disengage the blades (

4.7);

– apply the parking brake on sloping

ground;

– for cold starting, operate the choke

(

4.2 or 4.2a);

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efco EF 91 C in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Efco EF 91 C Manual

Product: