Manual Efco EF 91 C (page 85 of 176) (English, German, Dutch, French, Italian)

659051

Zoom out

Zoom in

1/176

15EN

of the front wheels. These improve

stability at the front and reduce the

chances of tipping over.

IMPORTANT

All the references

relating to the positions of controls are

described in chapter 4.

5.2 WHY THE SAFETY DEVICES CUT IN

The safety devices work in two ways:

– hey prevent the engine from starting

if all the safety requirements have not

been met;

– they stop the engine if even just one of

the safety requirements is lacking.

a) To start the engine, it is necessary that:

– the transmission is in “neutral”;

– the blades are not engaged;

– the operator is seated or the parking

brake is engaged.

b) The engine stops when:

– the operator leaves his seat when the

blades are engaged;

– the operator leaves his seat when the

transmission is not in “neutral”;

– the operator leaves his seat with the

transmission in “neutral” but without

applying the parking brake;

– the grass-catcher is lifted or the rear

discharge guard removed when the

blades are engaged;

– the parking brake is engaged without

disengaging the blades;

– the speed change is activated (

4.22)

or the drive pedal (

4.32) with the

parking brake on.

5.1 SAFETY RECOMMENDATIONS

DANGER!

Do not tamper with or

remove the safety devices tted on

the machine. REMEMBER THAT THE

USER IS ALWAYS RESPONSIBLE

FOR DAMAGE AND INJURY TO

OTHERS.

Before using the machine:

– read the general safety

regulations (

1.2), paying

particular attention to driving and

cutting on slopes;

– carefully read the instructions for

use, make sure you are familiar

with the controls and know how

to stop the blades and the engine

quickly;

– never put your hands or feet next

to or beneath the rotating parts

and always keep away from the

exit.

Do not use the machine when in a

precarious state of health or under

the eect of medicine or any other

substances that can reduce your

reex actions and your ability to

concentrate.

It is the user’s responsibility

to assess the potential risk of

the area where work is to be

carried out, and to take all the

necessary precautions to ensure

his own safety and that of others,

particularly on slopes or rough,

slippery and unstable ground.

Do not leave the machine on high

grass with the engine running to

avoid the risk of starting a re.

WARNING!

This machine must

not be used on slopes steeper than

10° (17%) (

5.5). If the machine is

likely to be used mostly on sloping

ground (never steeper than 10°), t

counterweights (supplied on reques

(

9.1) beneath the cross-member

5. HOW TO USE THE MACHINE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efco EF 91 C in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Efco EF 91 C Manual

Product: