659051
91
Zoom out
Zoom in
Previous page
1/176
Next page
21EN
WARNING!
To avoid backre,
position the throttle on «SLOW» for
20 seconds before stopping the
engine.
WARNING!
Always take out the
ignition key before leaving the
machine unattended!
IMPORTANT
To keep the battery
charged, do not leave the key in the
«ON» position when the engine is not
running.
5.4.10 Cleaning the machine
After each mowing, clean the outside of
the machine, empty the grass-catcher
and shake it to remove residual grass and
earth.
WARNING!
Always empty the
grass-catcher and do not leave
containers full of cut grass inside a
room.
Clean the plastic parts of the body with a
damp sponge using water and detergent,
taking care not to wet the engine, the
electrical parts or the electronic card
located under the dashboard.
IMPORTANT
Never use hose-nozzles
or harsh detergents for cleaning the
body and engine!
WARNING!
Do not let debris
and dry remains of grass
accumulate in upper part of the
cutting deck in order to keep
maximum machine eciency and
safety levels.
After each use, accurately clean the
cutting deck to remove any grass remains
or debris.
WARNING!
Wear eye
protection and keep people or
animals away from the surrounding
area when cleaning the cutting deck.
a) When washing the inside of the
cutting deck and the collector channel,
the machine must be on rm ground
with:
the grass-catcher or the rear discharge
guard tted;
– the operator seated;
– the cutting deck on position «1»;
– the engine running;
– the transmission in neutral;
the blades engaged.
Connect a water hose to its pipe tting
(1), and run water through it. Engage
the blade and leave it to turn for a few
minutes.
IMPORTANT
To avoid umpairing the
ecient working of the electromagnetic
clutch:
prevent the friction from coming into
contact with oil;
do not direct jets of high-pressure
water directly onto the clutch unit;
do not clean the clutch with petrol.
Take o the grass-catcher, empty and
rinse it, and then put it in a position where
it can dry quickly.
b) To clean the upper part of the
cutting deck:
lower the cutting deck completely
(position «1»);
1
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco EF 91 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco EF 91 C in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info