810921
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
ENGLISH
IGNITION
With the b
oiler-stove
in stand-by mode, (after having
checked
that the chamber is clean), press the key
, and the
ignition procedure will start.
On the display
the wording
ON AC” (start combustion)
will appear; after certain control cycles and after check-
ing that the pellets are burning, the display will show
the
wording
ON AR” (heating on).
This phase will last a few minutes, to allow the ignition
procedure to complete correctly and for the exchangers
in the b
oiler-stove
to heat up.
After a few minutes, the b
oiler-stove
will enter the heating
phase, indicating
the wording
burn” and later, during
regular functioning, the temperature of the output water,
set by the user, is indicated and the power chosen by the
automatic modulation system.
SWITCHING OFF
Pressing the key , when the b
oiler-stove
is on, will
start the switching off phase, which involves:
• Stopping the delivery of the pellets
• Burning any pellets left in the chamber, keeping the
fume fan on (usually for about 10’)
• Cooling the boiler’s body while the pump remains on
until the shut-off temperature is reached
• The indication “OF” on the display together with the
minutes remaining until shut-off
During the switching off phase, the b
oiler-stove
cannot
be turned on again; when the switching off phase is
completed the system automatically goes into stand-by
mode.
AUTOMATIC FUNCTIONING
The user must set the output water temperature, which
must be assessed according to the type and dimensions
of the system, and considering the atmospheric tempera-
ture linked to the season.
The b
oiler-stove
automatically modulates power accord-
ing to the difference between the set temperature (set on
the display) and the temperature measured by the water
sensor; on reaching the desired temperature, the burner
will function at minimum, going to power level 1.
The output water temperature can be increased by press-
ing the
key
,
or decreased by pressing the key .
The display alternatively shows the desired temperature
and the power which is automatically chosen by the elec-
tronic modulating system.
ECONOMY FUNCTION
Function suitable for boilers installed in small-scale sys-
tems, or whenever minimum power operation causes ex-
cessive heating.
This function, managed automatically, allows for switch-
ing the boiler off once the set delivery temperature is ex-
ceeded.
When the delivery temperature falls below the set value,
the boiler switches back on automatically. Request acti-
vation of this function, if required, from the Technical As-
sistance Centre during initial start-up.
When the ECONOMY function is activated, the display
will visualise ‘Econ’ after the other information.
REMOTE ACTIVATION FUNCTION
By means of a special connection wire (code 640560),
the b
oiler-stove
can be switched on/off by a remote con-
trol device such as a GSM telephonic activator, an envi-
ronment thermostat, a zone valve, or in any case a device
with clean contact with the following logic:
Contact open = b
oiler-stove
off
Contact closed = b
oiler-stove
on
Activation and deactivation takes place 10” after the
transfer of the last command.
If the remote activation of the door is connected, the b
oil-
er-stove
can be switched on and off in any case by the
control panel; the b
oiler-stove
will always act according
to the last command received, whether for switching on
or off.
PLEASE NOTE:
If the remote activation function is used, decouple the
remote connection cable, using a relay, if the distance
between the remote device and the boiler exceeds the
length of the cable code 640560 (1.5 m).
Consult the instruction sheet of the connection cable for
more detailed information.
ROOM VENTLATION
The boiler stove is equipped with a room ventilation sy-
stem; for setting the desired ventilation level, follow the
instructions indicated below.
Briefl y press the SET button to access the AIR menu;
use the
+/- buttons to select the following ventilation modes:
AUTO: ventilation adjusts automatically depending on
the boiler stove’s power output
OFF: the fan is always in use to have a minimum air flow
which prevents the fan from any overheating situation
FAN1: manual ventilation adjustment to 20%
FAN2: manual ventilation adjustment to 40%
FAN3: manual ventilation adjustment to 60%
FAN4: manual ventilation adjustment to 80%
FAN5: manual ventilation adjustment to 100%
After selecting the desired setting, if no button is pres-
sed for 5 seconds the system automatically exits the AIR
menu and saves the last setting visualised on the display.
INTRODUCTION ABOUT USE
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Mito Idro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Mito Idro in the language / languages: English as an attachment in your email.

The manual is 5.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Mito Idro

Edilkamin Mito Idro Usermanual and installation guide - German - 36 pages

Edilkamin Mito Idro Usermanual and installation guide - Dutch - 32 pages

Edilkamin Mito Idro Usermanual and installation guide - French, Italian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info