663878
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
GENERAL DESCRIPTION - MODEL 2100 SHARPENER
The standard Model 2100 sharpener is equipped with the novel 3-Stage EdgeSelect
®
Sharpening Module that sequentially sharpens, hones and strops your knife edge to
perfection. The knife is sharpened in the 1st Stage with 100% diamond-surfaced abrasives
and then honed in the 2nd Stage with finer diamond particles. In the 3rd Stage the edge
is stropped and polished to hair splitting sharpness. This proprietary 3-Stage sharpening
system creates an essentially burr-free triple beveled Trizor
®
knife edge that will stay sharp
longer than conventionally sharpened knives. The Sharpening Module, incorporating all
three stages, is a self-contained unit that can be removed for washing and sanitizing in a
dishwasher or at the sink. It is removed simply by depressing the release button (Figure 2)
and sliding the module off the motor-drive housing.
A rugged and powerful motor is enclosed in the motor housing. Splined drive couplings
attached to the shafts of the motor drive and the Sharpening Module permit its rapid
removal or engagement.
In all three stages, the edge is sharpened with alternating strokes in the right and left slots.
Plastic hold-down springs stabilize the knife blade against precise angle guides (Figure 3)
in each stage as the blade edge is precisely aligned against the sharpening, honing and
stropping disks. The downward movement of the blade in each of the slots is controlled
by an Edge Stop Plate, made of a durable polymer that positions the edge optimally and
securely as it contacts each disk, without damaging the sharp edge being formed. For best
results, the knife edge should only just touch or lightly rest on the front Edge Stop Plate.
Excessive downward pressure does not hasten the sharpening process and it will result in
unnecessary cutting into the Stop Plate.
Figure 2. Insert sharpening module on rails and slide towards the motor-drive section until it engages
motor-drive. To disengage press release button and slide away from the motor-drive, see Figure 16.
Motor-drive Section Release Button
(in back)
Knife Blade Guides
Sharpening Module
On/Off Switch
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EdgeCraft Chef-s Choice - Commercial 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EdgeCraft Chef-s Choice - Commercial 2100 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info