611763
4
Zoom out
Zoom in
Previous page
1/44
Next page
7-4-2011 Rev2 4 IR Link Pro Flush
This kit contains two 3IREDB Triple Blinking Emitters for control of 6 devices, and a 1IRQC Quick
Connect cable for direct control of popular Audio/Video Receivers (e.g. Yamaha, Onkyo,
Denon, Marantz, NAD, Harman Kardon, Pioneer, Sony etc). The IR Link Pro Flush Kit runs on a
12VDC mains adapter (included) and is expandable with extra IR Link Receivers in different
rooms.
The IR Link Pro Flush Kit is a mains powered InfraRed Extender System that allows full remote
control operation of audio/video components (such as your Blu-ray player, A/V Receiver, DVR,
Satellite Box, Cable Tuner, etc.) which are located behind closed cabinet doors, in other rooms,
or other concealed and/or out-of-sight locations.
An InfraRed Extender in general consists of an IR (InfraRed) capture device, the IR Receiver, a
distribution circuit/connecting block, the IR Hub, and finally the IR LED output, the IR Emitter,
which flashes the IR signal to the A/V component.
3. Kit content
The IR Link Pro Flush Kit is a pre-packaged InfraRed Remote Control Extender System. It includes
an IRLPRO Flush Mount IR Receiver with 4 interchangeable, coloured top covers (black, white,
brushed chrome and brass), an IRHUB4 Connecting Hub with 4 Emitter outputs + Status input
Jumper Cable, two 3IREDB Triple Blinking Emitters, a 1IRQC Quick Connect cable and a 12VDC
Power Supply. These parts are all that are necessary to control up to 7 components.
4. How does the ebode IR Link Pro Flush work?
The ebode IR Link Pro Flush is intended for use in IR control systems where the IRHUB4 Connecting
Hub is within reach of the 2-meter cable of the IRLPRO IR Receiver, e.g. when installing the IR Link
Pro Flush Kit in a cabinet where the controlled components are behind closed doors, and the
IRLPRO Flush Receiver can i.e. be mounted into the cabinet (see step 3 in chapter 5), but always
within line of sight of your hand held remotes.
5. Installing the ebode IR Link Pro Flush
The IRHUB4 sockets are colour coded for easy plug & play installation of the IR Receiver and IRED
Emitters, which have coloured jacks.
A typical system is shown in Fig. 1 below. Refer to this diagram and the procedure that follows
when making connections:
Fi
g
1
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link Pro Flush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link Pro Flush in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info