611753
6
Zoom out
Zoom in
Previous page
1/36
Next page
10-8-2010 6 ebode IR LINK C
6. Operation
To use the ebode IR Link C Remote Control Extension System, simply point your handheld
remote control(s) at the IR Receiver and press the desired button. A red LED on the front of
the IR Receiver will indicate the reception of your InfraRed command.
NOTE: The maximum usable distance between your IR remote and the IRLP Receiver will
vary for each remote and might be shorter than when directly used in the room controlling
the satellite Receiver or other IR controlled devices.
ADVANCED MULTIROOM HOOKUP
Figure 3 shows an advanced system using
two ebode IR Link C’s in a multi-room
installation. Except for the addition of a 2-
way DC passing RF splitter, the
connections are essentially the same.
7. How to avoid and solve possible
problems
Although the ebode IR Link C is equipped
with proprietary eIR
2
x
TM
(pronounced Irex)
Technology, which guarantees a high
level of immunity of InfraRed noise of
direct sunlight, CFL lighting and Flat Panel
TV’s (including Plasma, LCD and LED), in
rare cases, the IR Receiver may have to
be moved to a different location if the
unit is picking up unexpected
interference. This interference may, in
severe cases, prevent the system from
working. You can identify interference
when the InfraRed Emitters are lit or
blinking, even when you’re not using a remote control transmitting at the time.
After repositioning, check to see if the ebode IR Link C operates the satellite Receiver or
other components. If the ebode IR Link C still does not work, reposition the IRED Emitter(s). It
may not be located directly over the component’s InfraRed receiving "window". Consult
the owner's manual of the unit or the manufacturer for the exact location of the InfraRed
"window".
IMPORTANT: For installations involving more than two remote rooms, use the services of a
competent professional audio/video installer experienced in InfraRed Remote Control
Systems.
Do you still have questions? Please refer to www.ebodeelectronics.eu
8. Technical information
Power Supply: 230V~50Hz, 12VDC 100mA; 2.1mm
IR emitting diode cable: 3 IR LEDs
Cable length: 3 m from CPL to IR LEDs,
Receiver: dimensions 55x40x25mm
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info