611753

Ebode IR Link C Manual

4
Zoom out
Zoom in
Previous page
1/36
Next page
10-8-2010 4 ebode IR LINK C
2. Introduction
Congratulations on purchasing the ebode IR Link C. Our ebode proprietary eIR
2
x
TM
(pronounce Irex) Technology guarantees a high level of immunity for InfraRed noise from
direct sunlight, CFL lighting and Flat Panel TV’s (including Plasma, LCD and LED). It
provides accurate reproduction of the latest generation InfraRed codes that are used in
remote controls of, for instance, set-top boxes and media players (incl. RC5/6, RCMM,
XMP).
The IR Link C is a mains powered InfraRed Extender System that allows full remote control
operation of audio/video components (such as your Blu-ray player, A/V Receiver, DVR,
Satellite Box, Cable Tuner, etc.) which are located in another room and makes use of
existing coax cable (CATV).
An InfraRed Extender in general consists of an IR (InfraRed) capture device, the Receiver,
a distribution circuit/connecting block, the Hub, and finally the IR LED output, the Emitter,
which flashes the IR signal to the A/V component.
3. Set content
The ebode IR Link C consists of the following supplied parts:
1. One InfraRed Receiver, Model IRLP. It is placed at the remote room location to receive
IR signals from the handheld remote controller.
2. One INJ Injector. This unit, located in the remote room, injects the remote control signal
into the room to- room coaxial cable (along with the TV signal) and passes it to the CPL
Coupler in the main room. It also provides quick connection of the IRLP IR Receiver and
12VDC power supply cables.
3. One CPL Coupler. Located in the main room, this Coupler extracts the remote control
signal from the coaxial cable and passes it to the emitters that control your source
equipment. In addition, the CPL contains a 2-way RF splitter so that the TV signal can be
fed to a local TV.
4. One Triple Blinking IR Emitter, model 3IREDB. The Emitters on this device allow control of
three InfraRed remote controlled audio/video components. The IR Emitters have a self
adhesive film on one surface of each Emitter. This allows them to be “stuck” to the IR sensor
“window” on your source equipment. There is a set of replacement adhesive pads
included.
5. A 12VDC Power Supply. This plugs into a 230V~50Hz
outlet to provide power to the IRLP Receiver.
6. 3 extra replacement adhesives for the IR Emitters
4. How does the ebode IR Link C work?
The ebode IR Link C system uses the coaxial cable that
carries the TV RF signal from the source equipment in
the main room to the remote room, to send the IR
control signals back to the source equipment. The
coaxial cable may be up to 300m in length. If you
already have a coaxial cable connecting your video
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info