772504
7
Zoom out
Zoom in
Previous page
1/8
Next page
6. Maintenance
6.1 Do not use the methods that is not mentioned in this manual to disassemble or modify this machine , to avoid
damage to this printer or may cause other serious accident .
6.2 When the power is off , regularly clean the machine with a piece of cloth to wipe off dust and residue , if the
cloth is wet , do not use inflammable liquid to contact the inner circuit to avoid fire or electronic shock .
6.3 When printing finished, clean the residue in nozzle and extrude , to avoid nozzle choke for next printing , it is
also basic maintenance.
6.4 Recommended temperature for working environment is 5-35, do not air the machine body with a fan
when the printer is working .
6.5 Recommended humidity for the working environment is 30%-90% .
7. FAQ
Q1: Why is the printing model not adhesive to the printing bed?
A1: The nozzle is too far away from the bed, the proper distance between the nozzle and bed is the thickness of a
piece of A4 paper .
Q2: Why the filament do not come out from the nozzle?
A1: Check the filament feeder.If it’s external gearfeeder, then to observe whether gear rotates or not. If it’s built-in
stepper motor feeder, then to observe if the motor is working with a little sound . Otherwise, check if filament
feeder is connected to it’s main board well.
A2, Check temperature.
Printing nozzle temperature of PLA material range s from 200-230.
A3, Check if the nozzle is blocked.
Heat the nozzle to 230 for PLA ,push the filament gently , if there is still no filament come out , then need to
disassemble the nozzle, clean or replace it .
A4, Check if nozzle is too close to platform , if so, the filament can not come out ,so adjust the distance between
nozzle and platform with a piece of A4 paper .
Q3, The problem of print model misplaced
A1, The model did not slice properly, need to re-slice or change the model position to generate new Gcode file.
A2,The model file problem, if the model is still misplaced after re-slicing ,it’s the original file problem .
A3, the nozzle is forced to stop printing Path:
First, make sure you have not touched the nozzle when the machine is printing .
Second , if there is filament residue on the top layer, the residue area will become larger gradually, when it’s
accumulate to a certain amount and become stiffer enough, the nozzle will be forced to move abnormally.
A4, Power supply is not stable
Check if large power electrical equipment is working while the machine is printing ,dislocation happens when some
equipment turns off such as air conditioner , if so , you need to connect a voltage stabilizer to the printer power
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easy Threed K1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easy Threed K1 in the language / languages: English as an attachment in your email.

The manual is 1.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info