772504
4
Zoom out
Zoom in
Previous page
1/8
Next page
3 , Power on
Insert our K1 provided power cable to power port at the side of the printer control boxelectricity
connected successfully when the light inside button is on(Precaution: the USB port is
preserved by our technical person for firmware updated , please do not use it ; If printing finished or
no need to use for quite a long time, take off the power cable to power off)
4Slicer software application (STL format 3D file need be sliced to gcode
format that printer can recognize).
(1).This 3d printer runs with it’s own developed slicing software named Easyware KS , it is in the TF
card included in the accessories box , please copy it to your computer and no need
installation ,you can also download Easyware KS from official website, and you can watch Slicer
operation video in Youtube channel. Easyware KS slicer can recognize STL format 3D file.
(2). STL format 3D file need be sliced to .gcode format, and save to TF card, and Insert TF card to
printer, then can print 3D file. (3D Printer can recognize gcode format file only)
Warm Notice: there is a gcode file inside the TF card when it come from factory
5Print
1 Platform LevelingThe first time to use this printer, you need leveling the platform
Please adjust the distance between the nozzle and the platform in points, the distance
1
2
3
4
should be just the thickness of a sheet of paper.( Please do this leveling with the help of adults.)
a), Click the button , Z axis will go home position. After Z axis come tohome position, please turn off the
power, after turn off the power ,then you can move the X axis and Y axis by hand
b),Move the nozzle to point, And put a sheet of paper between the nozzle and the platform, if
1
the distance is too far , turn the hand-twisted nut counter-clockwise to make the printing
platform rise to the standard distance. If the distance between the nozzle and the platform is too
close, turn the hand-twisted nut clockwise to make the printing platform fall to the standard
distance, (check the distance is right or not .that is, when drawing A4 sheet, the nozzle should be
attached to the A4 sheet without scratching it).
c), do the same way to adjust another 3 points
2
3
4
d), When the distance between the nozzle and the platform all is right distance in four
1
2
3
4
points, leveling finished and succeed.
Please turn on the power again after platform leveling
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easy Threed K1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easy Threed K1 in the language / languages: English as an attachment in your email.

The manual is 1.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info