772504
6
Zoom out
Zoom in
Previous page
1/8
Next page
the printer power on ,press for 3 seconds then release , every time the nozzle will raise
1cm)
3Print
Insert the TF card to the printer, Click button, and the button light will flash, Please be
patient and wait about 2 minutes, printing starts( the Printer will choose the lastest
gcode file to print automatically) .
4Pause/Restore
during printing, Click ,the button light stops flashing , then printing paused.
If need to continue print , Click to restore, the button light flashes again , the printer goes back
to print .
5 Stop Print
If you want to stop print during printing , press button for 3 seconds then release , the
machine will stop printing, then printing cancelled.
6Unload Filament,Retract
If users want to change filament or keep the machine stop working for quite a long time , then need
to unload the filament , Click button,the light inside will flash, Please be patient and
wait about 2 minutes, the motor inside the head will work and draw out the filament , after
that, take out the filament from the print head.
.
After print ,remove the platform, and easy to take off the object.
High quality filament which is preferred to be used.
Various of filament are available on the market , and quality is much different too. poor quality
filament may cause broken or nozzle jam, Pls choose Easythreed high quality filament.
Safety Warning
Burning , keep your fingers away from the NOZZLE and BLACK INSULATOR when the printer is working
as temperature in this area reaches over 200 Celsius degree . Always be sure to keep your hands away from
moving parts when Mercury is working .
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easy Threed K1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easy Threed K1 in the language / languages: English as an attachment in your email.

The manual is 1.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info