Manual Durkopp Adler Beisler 1220-5 (page 64 of 69) (English)

457853

Zoom out

Zoom in

1/69

2.7 Thread regulation of overlock hook

Caution: Risk of injury!

Switch the main switch off.

Check and adjust the thread regulation only with the sewing unit

switched off.

Standard

The position of the individual thread guides or thread pullers is

dependent on the material, the sewing thread and the stitch type.

Therefore the following setting values have to be regarded as standard

values only.

Correction

–

Turn the handwheel until the right hook is in its top reverse point.

–

Loosen screw 10 and shift the thread puller 9 in such a way that

there is a distance of approx. 32 mm between the middle of the

screw and the middle of the eyelet.

–

Tighten screw 10.

Take care that the thread puller 9 is in vertical position.

–

Loosen screws 6 and 8 a little.

–

Position the thread pullers 3 and 7 as shown in the illustration.

–

Tighten screws 6 and 8.

–

Loosen screw 4 a little.

–

Position the thread guide 5 as shown in the illustration.

–

Tighten screw 4.

–

Loosen screw 2 a little.

–

Shift the thread guide 1 in such a way that the screw 2 is in the

centre of the longitudinal hole.

–

Tighten screw 2.

Note

If the seam requires more or less thread, shift the thread pullers 3 and

7 in the direction “+” or “-” respectively.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler Beisler 1220-5 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Durkopp Adler Beisler 1220-5 Manual

Product: