Manual Durkopp Adler Beisler 1220-5 (page 63 of 69) (English)

457853

Zoom out

Zoom in

1/69

2.6.2 Changing and adjusting the lower knife

Head EX 5205-22/233-6KS Head S52 134B

Caution: Risk of injury!

Switch the main switch off.

Change and adjust the lower knife only with the sewing unit switched

off.

Standard

The blade of the lower knife has to be flush with the top edge of the

throat plate.

Correction

–

Remove the fabric sliding sheet.

–

Swivel the sewing foot out.

–

Loosen screw 4.

–

Draw the holder of the lower knife 3 to the left as far as it will go

and tighten screw 4 slightly.

–

Loosen screw 2 and remove the old knife.

–

Insert a new, sharp knife in guide 1 in such a way that the blade is

flush with the top edge of the throat plate.

–

Tighten screw 2.

–

Turn the handwheel until the upper knife is in its highest position.

–

Loosen screw 4 and let the holder of the lower knife 3 spring

against the upper knife.

–

Tighten screw 4.

4 3 2 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler Beisler 1220-5 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Durkopp Adler Beisler 1220-5 Manual

Product: