612059
29
Zoom out
Zoom in
Previous page
1/56
Next page
Operation
Operating Instructions 971 Version 00.0 - 03/2014
27
5.6 Preparing, starting and interrupting the automatic sequence
5.6.1 Replacing the adjustable material holders
Fig. 13: Replacing material holders
To replace material holders:
1. Set the material holders to the largest size by loosening the screws (3)
and (4) with the special key (1).
2. Turn the adjusting screws (2) accordingly.
3. Swing out the sewing and cutting heads, by pulling the magnetic roller
shafts downward and swinging out the heads, 5.7.1 Swinging the
sewing head in and out, pg. 31, 5.7.2 Swinging the cutting head in
or out, pg. 33.
4. Loosen the fastening screws (6) on each material holder using the
special key (1) and remove the material holders.
5. Screw the new material holders to the turntable; the numbering (5) on the
holders indicates their placement on the turntable.
6. Set the desired size by turning the adjusting screw (2) using the special
key (1), 5.6.2 Changing the size of the adjustable material holders,
pg. 28.
Caution: Risk of injury!
Switch off the main switch before replacing
material holders.
WARNING
(1) - Special key
(2) - Adjusting screws
(3) - Screw
(4) - Screw
(5) - Numbering
(6) - Fastening screws
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 971-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 971-01 in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 971-01

Durkopp Adler 971-01 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info