612059
31
Zoom out
Zoom in
Previous page
1/56
Next page
Operation
Operating Instructions 971 Version 00.0 - 03/2014
29
5.6.3 Inserting the sewing material and starting the automatic
sequence
Fig. 15: Inserting the sewing material
To start the automatic sequence:
1. Switch on the main switch (5).
2. Press the left foot pedal and hold in this position.
3. Place the sewing material at both rear end stops (1) and (2) and align
it centered to the clamp.
4. Release the left foot pedal (3).
5. It may be necessary to raise the clamp a little to align the material more
precisely.
6. Press and hold the left foot pedal (3).
7. Align the material.
8. Release the left foot pedal (3).
9. Start the automatic sequence by pressing the right foot pedal (4).
5.6.4 Extending the opening time of the clamp
The clamp is opened after the table is turned and closed again after the
stacker function is complete. Only a certain period of time is available
therefore for the feed process.
If there is not enough time to position the material correctly, the clamp's
opening time can be extended by pressing the left foot pedal.
If the clamp is opened for too long, the automatic sequence is stopped.
(1) - End stop
(2) - End stop
(3) - Foot pedal, left
(4) - Foot pedal, right
(5) - Main switch
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 971-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 971-01 in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 971-01

Durkopp Adler 971-01 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info