612064
87
Zoom out
Zoom in
Previous page
1/110
Next page
Error and information messages
Operating manual 911 - Version 00.0 - 06/2013
85
2355 Stroke position stepper motor overload
• Transport system not moving freely
• Obstacles to the transport motion
• Correct the cause of not moving
freely
• Remove obstacles/adjust the motion
2356 Stroke position stepper motor
overtemperature
• Transport system not moving freely
• Stepper motor defective
• Controller defective
• Correct the cause of not moving
freely
• Replace the stepper motor
• Replace the controller
Machine controller
3100 Machine control voltage
• Short-term mains voltage dropout • Check the mains voltage
3102 Machine voltage in sewing motor
intermediate circuit
• Short-term mains voltage dropout • Check the mains voltage
3103 Machine voltage in stepper motor
intermediate circuit
• Short-term mains voltage dropout • Check the mains voltage
3107 Machine temperature
• Ventilation openings closed
• Ventilation grill dirty
• Clean the ventilation grill
• Check the ventilation openings
3109 Safe Stop is switched on Switch off Safe Stop
3121 Compressed air is missing or
insufficient
Turn on the compressed air, stabilize
3123 Oil sensor active Topping up with oil
3210 Broken thread Re-thread the thread
3215 Bobbin empty (remaining thread
counter)
Insert a full bobbin
3220 Bobbin empty (remaining thread
counter)
Insert a full bobbin
3500 Error in calculating the contour data • Reload the contour data
• Check the contour data
3501 Target position of the XY clamps
outside the motion limits
Adjust the contour data
3502 Target position of the XY clamps within
the “forbidden areas”
Adjust the contour data
3721
3722
Internal error • Switch the machine off and on again
• Software update
• Notify DA Service
4201 Internal CF card defective • Switch the machine off and on again
• Retrofit/replace controller
5301 Program cannot be sewn Copy program to DAC
Error
code
Description Troubleshooting
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 911-211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 911-211 in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 911-211

Durkopp Adler 911-211 User Manual - German - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info