612064
85
Zoom out
Zoom in
Previous page
1/110
Next page
Error and information messages
Operating manual 911 - Version 00.0 - 06/2013
83
8 Error and information messages
8.1 Error messages
Error
code
Description Troubleshooting
Sewing motor
1051 Sewing motor timeout
• Cable to sewing motor reference
switch defective
• Reference switch defective
• Upper part does not move freely or
has excessive belt tension
• Replace the cable
• Replace the reference switch
• Check the freedom of movement and
belt tension of the upper part
1052 Excessive sewing motor current
• Sewing motor cable defective
• Sewing motor defective
• Controller defective
• Replace the sewing motor cable
• Replace the sewing motor
• Replace the controller
1053 Sewing motor mains voltage too high Check the mains voltage
1055 Sewing motor overload
• Sewing motor blocked/not moving
freely
• Sewing motor defective
• Controller defective
• Remove the blockage/cause of lack
of freedom of movement
• Check the sewing motor
• Check the controller
1056 Sewing motor overtemperature
• Sewing motor not moving freely
• Sewing motor defective
• Controller defective
• Remove the cause of the lack of
freedom of motion
• Replace the sewing motor
• Replace the controller
1058
1302
1342
1344
Sewing motor speed
• Sewing motor defective
Sewing motor error
Controller not receiving pulses from
pulse encoder in motor
Sewing motor error
Internal error
• Replace the sewing motor
• Check the cable from the pulse
encoder in the motor to the controller
• Switch the machine off and on again
• Software update
Stepper motors
2101 X-axis stepper motor referencing
timeout
• Faulty reference switch setting
• Cable to reference switch defective
• Reference switch defective
Adjust reference switch
• Replace the cable
• Check reference switch
2102 X-axis stepper motor current error
• Stepper motor blocked
• Encoder cable not connected or
defective
• Encoder defective
• Remove the blockage
• Check/replace the encoder cable
• Replace the stepper motor
2152 X-axis stepper motor overcurrent • Replace the stepper motor
• Replace the controller
2153 X-axis stepper motor overvoltage
• Mains voltage too high
• Checking the mains voltage
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 911-211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 911-211 in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 911-211

Durkopp Adler 911-211 User Manual - German - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info