612064
86
Zoom out
Zoom in
Previous page
1/110
Next page
Error and information messages
84
Operating manual 911 - Version 00.0 - 06/2013
2155 X-axis stepper motor overload
• Transport system not moving freely
• Obstacle to transport motion
• Correct the cause of not moving
freely
• Remove obstacles/adjust the motion
2156 X-axis stepper motor overtemperature
• Stepper motor not moving freely
• Stepper motor defective
• Controller defective
• Remove the cause of the lack of
freedom of motion
• Replace the stepper motor
• Replace the controller
2201 Y-axis stepper motor referencing
timeout
• Faulty reference switch setting
• Cable to reference switch defective
• Reference switch defective
Adjust reference switch
• Replace the cable
• Replace the reference switch
2202 Y-axis stepper motor current error
• Stepper motor blocked
• Encoder cable not connected or
defective
• Encoder defective
• Remove the blockage
• Check/replace the encoder cable
• Replace the encoder
2252 Y-axis stepper motor overcurrent • Replace the stepper motor
• Replace the controller
2253 Y-axis stepper motor overvoltage
• Mains voltage too high • Checking the mains voltage
2255 Y-axis stepper motor overload
• Transport system not moving freely
• Obstacles to the transport motion
• Correct the cause of not moving
freely
• Remove obstacles/adjust the motion
2256 Y-axis stepper motor overtemperature
• Transport system not moving freely
• Stepper motor defective
• Controller defective
• Remove the cause of the lack of
freedom of motion
• Replace the stepper motor
• Replace the controller
2301 Stroke position stepper motor
referencing timeout
• Faulty reference switch setting
• Cable to reference switch defective
• Reference switch defective
Adjust reference switch
• Replace the cable
• Replace the reference switch
2302 Stroke position stepper motor current
error
• Stepper motor blocked
• Encoder cable not connected or
defective
• Encoder defective
• Remove the blockage
• Check/replace the encoder cable
• Replace the encoder
2352 Stroke position stepper motor
overcurrent
• Replace the stepper motor
• Replace the controller
2353 Stroke position stepper motor
overvoltage
• Mains voltage too high
• Checking the mains voltage
Error
code
Description Troubleshooting
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 911-211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 911-211 in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 911-211

Durkopp Adler 911-211 User Manual - German - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info