612089
69
Zoom out
Zoom in
Previous page
1/114
Next page
Operating instructions
Operating manual 806N Version 00.0 - 12/2012 67
The operation of the Work step-by-step mode is described in detail in
Section 5.3 Carrying out a test run.
This setting is deleted after switching off the machine, after loading a dif-
ferent seam program or after an EMERGENCY STOP.
5.7.2 Activating Sewing without edge folding
In the Sewing without edge folding mode the machine only sews
the fold-
ing procedure is not performed. This mode can be used for (e.g.) testing
a new seam program or performing a seam quality check.
The speed is also often reduced when using this mode, but this setting
must be specially performed Section 5.7.10 Setting the motor speed.
You activate Sewing without edge folding as follows:
1. Navigate to Menu 2.
2. Press the Sew without edge folding button .
The button is now highlighted in green. In the next sewing cycle the
machine only sews and does not fold. The button is also displayed in
Menu 1.
3. Press the Sew without edge folding button again to deactivate
this mode.
The button is no longer highlighted in green. The machine once more
performs folding in the next sewing cycle.
This setting is deleted after switching off the machine, after loading a dif-
ferent seam program or after an EMERGENCY STOP.
5.7.3 Switching the stroke position on/off
The stroke position is the clearance between the sewing foot and the
seam material. This clearance should be set to the optimum value so that
the seam material is held on the sewing material support when the thread
is tightened. This results in a high quality seam.
Stroke position OFF
The foot always remains at the same distance above the seam material.
An adjustment to suit multi-layered material is not possible.
Stroke position ON
The foot adjusts to suit the thickness of multi-layered seam material.
A prerequisite for this is that the necessary information for this is stored
in the respective seam program.
You switch the Stroke position on/off as follows:
1. Navigate to Menu 2.
2. Press the Stroke position button .
The button is now highlighted in green. When sewing, the machine
automatically adjusts the stroke position according to the information
in the seam program.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 806N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 806N in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 806N

Durkopp Adler 806N User Manual - German - 114 pages

Durkopp Adler 806N User Manual - French - 114 pages

Durkopp Adler 806N User Manual - Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info