612089
67
Zoom out
Zoom in
Previous page
1/114
Next page
Operating instructions
Operating manual 806N Version 00.0 - 12/2012 65
Operating You operate the Slide automatically forward mode as follows:
The Start button lights up green and the middle slide is forward.
Be careful to avoid being cut by the sharp edges of the middle
slide.
1. Place the pocket blank on the middle slide.
2. Place and align the basic part on the edge folding station.
3. Fasten the basic part by pressing Manual button 1 or the Foot
switch.
The air suction is now switched on.
4. Press Manual button 1 to start the normal sewing process. Be care-
ful to avoid being cut or crushed by the slide moving quickly forwards.
5.6.5 Activating the alignment of strips
After folding the pocket blank the machine pulls the middle slide out of the
pocket and stops. The alignment of the pocket blank can now be checked.
Activating You activate the Strip alignment mode as follows:
1. Press the Strip alignment button .
The button is now highlighted in green. In the next sewing cycle the
machine stops after folding and the alignment of the pocket can be
checked.
2. Press the Strip alignment button again to deactivate this mode.
The button is no longer highlighted in green. The machine no longer
stops after folding in the next sewing cycle.
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.
Operating You operate the Strip alignment mode as follows:
The machine stops after folding. The finished folded pocket lies
on the basic part.
1. Check the alignment of the pocket on the basic part.
2. If the alignment is correct: Press Manual button 1.
The sewing procedure is resumed normally.
3. If the alignment is not correct: Press the Cancel button.
The sewing procedure is cancelled. The basic part and pocket must
be placed again.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 806N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 806N in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 806N

Durkopp Adler 806N User Manual - German - 114 pages

Durkopp Adler 806N User Manual - French - 114 pages

Durkopp Adler 806N User Manual - Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info