612089
68
Zoom out
Zoom in
Previous page
1/114
Next page
Operating instructions
66 Operating manual 806N Version 00.0 - 12/2012
5.6.6 Initiating a change of shape
Different shaping assemblies are required for each seam program.
A shaping assembly consists of:
Edge folding frame
Middle slide
Hose insert (806N-121 only)
Transfer plate
The procedure for fitting or replacing the individual parts is described in
Section 5.2.6 Fitting/changing the shaping assembly.
5.7 Setting options on user interface 2
Settings in Menu 2 can only be performed between two sewing cycles.
Menu 2 cannot be accessed when the machine is active. Activated but-
tons are highlighted in green.
Some of the settings available in Menu 2 are optional extras. These but-
tons are still present when the optional extras are not present but these
have no function and do not change their appearance.
You access Menu 2 as follows:
1. Navigate to Menu 1, Section 4.2.1 Structure of the operating
software and Section 5.2.1 Making the basic settings.
2. In Menu 1 press the Global parameters button .
Menu 2 opens.
5.7.1 Working step-by-step
The machine stops after each working sub-step. This setting is useful for
checking modified machine settings.
You activate the Work step-by-step mode as follows:
1. Navigate to Menu 2.
2. Press the Work step-by-step button .
The button is now highlighted in green. In the next sewing cycle the
machine stops after the first working sub-step. The button is displayed
in Menu 1.
3. Press the Work step-by-step button again to deactivate this
mode.
The button is no longer highlighted in green. The machine does not
stop in the next sewing cycle.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 806N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 806N in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 806N

Durkopp Adler 806N User Manual - German - 114 pages

Durkopp Adler 806N User Manual - French - 114 pages

Durkopp Adler 806N User Manual - Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info