633970
12
Zoom out
Zoom in
Previous page
1/28
Next page
10
process by the adjustable bobbin winder pre-tension U.
Indication 2:
The bobbin thread pre-tension U should be adjusted so that the bobbin thread is wound regularly with the
lowest possible tension.
Presser foot
3.5
3.5.1
Lifting the presser foot
-by knee lever in basic equipment
The lifted presser foot can be arrested in its upper position by
turning the lever B.
3.5.2
Regulating the presser foot
- by the knurled screw N, according to the equipment
Turn clockwise for higher pressure
Turn counter-clockwise for lower pressure
3.5.3
Changing the presser foot
- Arrest the presser foot in its upper position by turning the lever B,
- Move the needle to its upper dead point
- Loosen the screw and pull off the presser foot,
Fit the other presser foot in inverted sequence.
Feed
3.6
3.6.1
Feed dog
3.6.1.1
Stitch length
- For adjusting the stitch length, turn the knurled handle Q.
Turn clockwise = for reducing the stitch length
Turn counter-clockwise = for increasing the stitch length
3.6.1.2
Stitch regulator
- Lift the stitch regulator Q for sewing backwards or for bartacking,
3.6.1.3
Bartacking
- by lifting the stitch regulator lever Q in case of basic equipment,
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 267 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 267 - 2016 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info