783570
6
Zoom out
Zoom in
Previous page
1/9
Next page
10 11
Empty beans from the
Grinder.
Remove the Handle.
Ensure that the Handle is in
place and held to stop the
Shaft from turning.
You can turn the Grinder
upside down and rest the
central part of the Handle
on the work surface,
allowing you to hold the
Grinder Body.
The parts are positioned in
the order shown above.
Ensure that the Handle is
in place and held to stop
the shaft from turning. You
can turn the Grinder upside
down and rest the central
part of the Handle on the
work surface, allowing you
to hold the Grinder Body.
Turn the Grind Control Dial
in an anti-clockwise direction
until it becomes free from
the shaft. This will release
the Disc, Inner Burr and
Spring.
Place Spring onto the Shaft.
CLEANING
After some use, you may nd that the individual click settings become less dened. Grinding
will release oils which will build up on the burrs. These oils can affect both the avour of your
ground coffee and your grinding performance. It is recommended to disassemble and clean the
parts of your grinder regularly.
TO DISASSEMBLE YOUR GRINDER FOR CLEANING:
CLEANING CONTINUED
All parts can be cleaned with a small brush (e.g. an old toothbrush – do not use a wire brush)
and warm soapy water. Do not submerge the Grinder, including the Grind Control Dial,
Handle or Grinder Body in water. Do not place any parts in a dishwasher.
WARNING: Burrs will have sharp edges. Take care when cleaning.
Clean all parts of excess oils and coffee grounds and make sure they are fully dried before
reassembly.
TO REASSEMBLE YOUR GRINDER:
1
1
4
2
2
3
3
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Grinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Grinder in the language / languages: English as an attachment in your email.

The manual is 1.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info