783570

Dualit Grinder Manual

4
Zoom out
Zoom in
Previous page
1/9
Next page
6 7
123
3
TIP: Remove the handle, place your Grinder on a set of scales and zero. You can then weigh
out and grind the exact amount of beans, with no wastage. To keep your coffee fresh avoid
keeping coffee beans in your grinder; remove and store in an airtight container.
Use the Quick Start Grind Settings in the Table on the following page as a guide for rst use.
Please note these settings are only a guide and further adjustment may be required depending
on specic coffee / machine being used.
THE BURRS OF YOUR NEW GRINDER ARE MADE FROM HIGH QUALITY
STAINLESS STEEL, BUT OVER TIME THEY MAY WEAR. IF YOU NOTICE
A CHANGE IN GRINDING ACCURACY, WE RECOMMEND YOU REPEAT
THE STEPS IN FIRST USE – CALIBRATION PROCESS.
TIP: You may sometimes nd that coffee grinds will clump together or even shoot out of the
jar. This is caused by a build-up of static electricity when grinding. To remove the static, simply
tap the jar and grinder assembly against a work surface 3 or 4 times, until the static dissipates. If
the static still remains, clean the Jar with warm soapy water and dry thoroughly.
Ensure the Jar is located
onto the Grinder Body.
Use a rotational motion to
help it locate.
Gently turn the Grind
Control Dial clockwise
until you feel resistance to
turning. The burrs are now
touching and you will not
be able to turn the Grind
Control Dial any further.
Important: Do NOT turn
the handle at this point. You
risk damaging the burrs.
Remove the Handle and
pour fresh, whole roasted
coffee beans into the
Grinder Body.
Turn the Grind Control Dial
anti-clockwise, until it clicks
into place; this separates
the Burrs to allow them to
rotate freely. The Grinder is
now calibrated to ‘0 Clicks’.
Now turn the Grind control
dial anti-clockwise 4 clicks.
Note: Dualit does not
recommend grinding
ner than click 4 or
coarser than click 40.
Replace the Handle and turn
it Clockwise to grind coffee
into the Jar.
FIRST USE
IT IS IMPORTANT TO SELECT THE CORRECT GRIND SIZE FOR YOUR
COFFEE BREWING APPLICATION. For rst use it is important to calibrate your
grinder. This ensures an accurate and repeatable grind size that helps make great coffee.
FIRST USE CALIBRATION PROCESS
Note: Empty your grinder of any coffee before calibration.
USING YOUR MANUAL GRINDER
1
Ensure that the Handle is
in place and held to stop
the Shaft from turning. You
can turn the Grinder upside
down and rest the central
part of the Handle on the
work surface, allowing you
to hold the Grinder Body.
2
DON’T FORGET
TO REGISTER
YOUR PRODUCT
WWW. DUALIT.COM/REGISTER
OR BY POST
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Grinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Grinder in the language / languages: English as an attachment in your email.

The manual is 1.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info