783567
12
Zoom out
Zoom in
Previous page
1/21
Next page
22 23
DESCALER
WATER
1
Ensure the Water Tank
is lled with water before
adding descaler. Ensure
that a compatible descaler
is used and that any water
softners are removed before
descaling.
DESCALE
HARD WATER WILL CAUSE LIMESCALE BUILD-UP, RESULTING IN BLOCKAGES THAT
CAUSE PERMANENT DAMAGE. See Limescale Warning on page 8. The machine will display
a warning when descale is overdue. It is essential that a compatible descaler is used -
visit www.dualit.com/accessories for descaler options. See page 10 for Button and Warning
Symbols. The descale process takes approximately 20 minutes.
Place a 2L container
underneath the Coffee
Nozzle and Steam Nozzle.
Plug in Power Cord and
press the Power Button
to turn the machine on.
Water will purge through
the Coffee Nozzle.
FILL WATER TANK
AND ADD
DESCALER
Press and hold the Power
and Espresso Buttons
for 5 seconds. Two beeps
will sound and the Descale
Warning / Espresso Button
will ash. Press the Espresso
Button to start descale
process.
4 5
The Descale Warning
symbol will ash during the
descale process. Stand away
from the machine during this
process. Liquid will dispense
from the Nozzle and
Steam Wand intermitently.
Caution: Hot.
When the Water Tank
Warning and Espresso
Button ash, remove
the Water Tank, empty
and rinse to remove all
remaining descale solution.
6
Fill the Water Tank with fresh
water and install back in the
machine.
The machine will automatically
start to dispense water out of
the Nozzle and Steam Wand
and will switch off once the
dispense cycle is complete.
Ret water softner.
FINISHREMOVE WATER
TANK
SELF CLEAN
2
Ensure a 150ml container
is below the Steam Wand.
When the machine is turned
on, hold down the Power
Button and Lungo Button
for 5 seconds. Two beeps
will sound.
EMPTY SYSTEM
If you are not going to use your machine for a long period of time, it is
recommended that you use the Empty System Function. This process will
drain all of the water out of the system through the Steam Tube, preventing
the chance of limescale build up. See page 10 for Button and Warning
Symbols.
When the Empty System
warning is displayed, remove
the Water Tank and place
on the side.
REMOVE WATER
TANK
Once the Water Tank is
removed, water will pour
out of the Steam Nozzle.
The machine will then turn
off.
Ensure a 150ml container is
below the Coffee Nozzle.
When the machine is turned
on, hold down the Power
Button and Hot Water
Button for 5 seconds. Two
beeps will sound.
The machine will dispense
a small amount of water
through the Coffee Nozzle
and into the container
before returning back to the
menu.
MANUAL RINSE
It is recommended that a Manual Rinse is conducted at the end of each day the machine is
used. This process ushes water through the Coffee Nozzle, removing coffee residue from
inside the machine and therefore reducing the chance of mould build up. See page 10 for
Button and Warning Symbols.
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
S
W
I
T
C
H
O
F
F
&
3ACTIVATE 1ACTIVATE 3EMPTY SYSTEM
1ACTIVATE 2RINSE
2TURN MACHINE
ON
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Bean to Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Bean to Go in the language / languages: English as an attachment in your email.

The manual is 15.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info