783567
10
Zoom out
Zoom in
Previous page
1/21
Next page
18 19
WARMING MILK USING STEAM
IMPORTANT NOTICE: After each use, wipe the Steam Wand & ush the inside of
the Wand by dispensing water. It is recommended to use a chilled Milk Jug and fresh semi-
skimmed milk straight from the fridge for best results. Note: skimmed and full fat can also be used.
Keep hands away from the Outlet at all times. Caution: Hot! Risk of scalding.
Direct the Steam Wand at
the drip tray and press the
Steam Button. Please note
that some water will be
ejected. The Steam Indicator
Light will ash until the boiler
is at the correct temperature.
Once the milk is at the desired
temperature, turn off the
steam by pressing the Steam
Button. Ensure the steam is
turned off before removing
the Wand from the Jug.
Pour immediately. Risk of
scalding.
Add milk to a Milk Jug. Hold
the Jug by its handle and tilt
at a slight angle. Place the
Steam Wand close to the
edge of the jug, with the tip
close to the bottom.
Once the Steam Indicator
Light is solid, press the Steam
Button. The steam will ow
from the Nozzle and through
the milk. Take care not to
splash the milk.
Note: The steam will stop
automatically if left on for 90
seconds
Pull the Steam Wand Metal
Cover downwards to
remove.
To prevent damage to your
machine, activate the Hot
Water Function and wipe
the Steam Wand clean.
Wait 30 seconds for the
Steam Wand to cool down
before installing the Metal
Steam Cover.
Add milk to a Milk Jug. Hold
the Jug by its handle and tilt
at a slight angle. Place the
Steam Wand close to the
edge of the jug, with the tip
close to the bottom.
Gently tap the Milk Jug
against the worktop to
collapse any large bubbles.
Swirling will mix the
milk with the froth. Pour
immediately.
Once the Steam Indicator
Light is solid, press the Steam
Button. The steam will ow
from the Nozzle and through
the milk. Take care not to
splash the milk. Note: The
steam will stop automatically if
left on for 90 seconds
Lower the Steam Wand
into the Jug so that the tip
is 1-2cm below the milk’s
surface. Once the milk has
reached the desired level of
froth, press the Steam Button
to turn off the steam. Ensure
the steam is turned off prior
to removing the wand from
the Jug.
FROTHING MILK
IMPORTANT NOTICE: After each use, wipe the Steam Wand & ush the inside of
the Wand by dispensing water (page 18). It is recommended to use a chilled Milk Jug and
fresh semi-skimmed milk straight from the fridge for best results. Note: skimmed and full fat can
also be used. Keep hands away from the Outlet at all times. Caution: Hot! Risk of scalding.
To prevent damage to
your machine, activate
the Hot Water function
and clean the Steam
Wand and Metal Cover.
Ensure the Steam Wand Metal
Cover is in place. Direct the
Steam Wand at the drip tray
and press the Steam Button.
Please note that some water will
be ejected. The Steam Indicator
Light will ash until the boiler is
at the correct temperature.
1REMOVE STEAM
WAND METAL
COVER
2PURGE STEAM
WAND 3ADD MILK 1PURGE STEAM
WAND
ADD MILK
2START STEAMING
3
5MILK
TEMPERATURE
4START STEAMING METAL STEAM
COVER INSTALL
65TAP MILK JUG CLEAN
6
FROTHING
4
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Bean to Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Bean to Go in the language / languages: English as an attachment in your email.

The manual is 15.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info