783567
13
Zoom out
Zoom in
Previous page
1/21
Next page
24 25
Empty the contents of the
External Drip Tray into a
sink.
Remove Internal Drip Tray
by pulling on the handle.
3
Remove the Grounds
Container from the Internal
Drip Tray and empty the
contents into a bin. Rinse
the Grounds Container with
warm water and dry off. Place
Grounds Container to one side.
4
Drain the contents of the
Internal Drip Tray into a
sink, then wash and dry.
CLEANING
It is recommended to clean your machine after each day of use in order
to extend its life. Before cleaning, make sure your machine is
switched off, unplugged and allowed to cool.
EMPTY GROUNDS
CONTAINER
DRAIN INTERNAL
DRIP TRAY
CLEANING - CONTINUED
7
Rinse Infuser under tap
with warm water. Ensure to
dry afterwards. DO NOT
PUT IN DISHWASHER
OR SUBMERGE UNDER
WATER.
RINSE INFUSER 9
Push the Infuser into the
Infuser Support. Please
ensure that both of the
orange clips engage. There
will be an audible click once
engaged.
INSTALL INFUSER
6
Remove the Infuser by
pressing both the orange
buttons inwards.
REMOVE INFUSER
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
S
W
I
T
C
H
O
F
F
&
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
S
W
I
T
C
H
O
F
F
&
1REMOVE AND
DRAIN EXTERNAL
DRIP TRAY
2REMOVE INTERNAL
DRIP TRAY
Place the Grounds Container
onto the Internal Drip Tray
and slide into the machine.
The front of the Drip Tray will
be ush with the machine, if it
is not, there is likely to be an
obstruction.
11 INTERNAL DRIP
TRAY INSTALL
Press on the bottom of the
Service Door to raise its
top edge. Pull on the top
edge to remove the service
door. Wipe inside of Service
Door.
5REMOVE SERVICE
DOOR
Align the Service Door’s two
metal pins into the slots of the
appliance body. Once aligned,
push the Service Door into
place.
10 REPLACE SERVICE
DOOR
Pull the Steam Wand Metal
Cover downwards to
remove. Rinse with warm
water and place onto a
clean surface.
12 REMOVE STEAM
TUBE METAL
COVER AND RINSE
Use the supplied Cleaning
Brush to clean the Powder
Outlet above the Infuser
Support.
8CLEAN INSIDE OF
MACHINE
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Bean to Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Bean to Go in the language / languages: English as an attachment in your email.

The manual is 15.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info