578050

Dual Saw CS 490 Manual

22
Zoom out
Zoom in
Previous page
1/80
Next page
22
• Use the protective equipment. Always wear protective glasses. If the conditions so require, a dust
mask, anti-slip safety boots, a protective helmet or hearing protection must be worn.
USE AND MAINTENANCE
• Use bar clamps or other devices to fasten the workpiece on a stable platform. It is dangerous and you
can easily lose your balance if you hold the workpiece in your hand or press it against your body. Hold
the tool tight so that you do not lose control.
• Do not exert excessive pressure on the device. Use the suitable tool for the relevant purpose. With the
suitable tool, you achieve better results and reduce the risk of accident.
• Do not use the tool if it cannot be switched on or off with the push button. Tools that cannot be swit-
ched on and off using the push button are dangerous and need to be repaired.
• Disconnect the tool from the mains before making any inspections or settings, replacing accessories
or stowing the tool away. These precautionary measures reduce the risk of the tool being started by
accident.
• Store the tool in a dry and safe place which neither children nor other persons not training in operating
the tool can access. Electric tools represent a hazard if they are used by untrained persons.
• Ensure appropriate maintenance of the tools. Keep the cutting tools clean and in a sharp condition.
Correctly maintained tools with sharp edges block less frequently and are more easy to use. Every
retrofitting or modification constitutes abuse and may result in hazardous situations.
• Check the tool for moving components that are incorrectly adjusted or rib next to one another, dama-
ged parts and other problems, which may affect the normal operation of the tool. Contact customer
services for damaged parts before continuing to use the tool. Many accidents are down to insufficiently
maintained tools. Define a maintenance plan for your tools, which specifies regular inspections. Cont-
act customer services to have faulty switched replaced. Ensure that the handles are dry, clean and free
from oil and grease.
• Use only accessories recommended by the manufacturer for your model. Accessories that are planned
for a certain tool can cause dangerous conditions when used for another tool.
• Ensure that the cable is not in the cutting area when the tool is in operation.
CUSTOMER SERVICES
• Repairs on the tool may be carried out by qualified specialist staff only. Maintenance or repair work
that is not carried out by qualified staff may increase the risk of injury. Contact customer services with
all questions regarding repairs.
• For maintenance or repair work on the tool, identical spare parts need to be used. Follow the instruc-
tions in the repair sections of this manual. The use of non-authorised parts or the non-observance of
repair instructions increases the risk of electric shock and injury. Certain detergents, such as petrol,
carbon tetrachloride, ammonia, etc., may cause damage to the plastic parts.
IMPORTANT NOTE!
THE MOVING PARTS MAY NOT BE TOUCHED AS LONG AS THE MACHINE IS RUNNING.
SPECIAL SAFETY REGULATIONS
HAZARD! KEEP HANDS AWAY FROM SAW AREA AND SAW BLADE.
• Always hold the machine with one hand on the additional handle and with the other one on the motor
housing. If you hold the machine with both hands, there is a risk of the hands coming into contact with
the saw blades. Hold the saw to the side of the body so that your body is not located on an extended
line behind the saw blade. Hold the saw tight so that you do not lose control. Do not hold with your
hands under the material that you are processing. The protective lid does not offer any protection from
the saw blade on the bottom of the material. Do not attempt to remove material parts already sawn
off as long as the saw blade is still moving. Always ensure that the bottom protective lid is correctly
closed before using the saw. Do not use the saw if the lower protective lid cannot be moved smoothly
and does not immediately close. Never jam or tie down the bottom protective lid in the open position. If
the saw accidentally falls to the ground, the bottom protective lid may bend. Lift the bottom protective
lid with the use of a lifting handle and ensure that the protective lid can move smoothly and does not
touch the saw blade or other parts. Check the operability and condition of the spring for the bottom
protective lid in all cut angles and depths. If the protective lid and the spring do not operate correctly,
the machine will need to be repaired before any further use. Damaged parts, adhesive deposits or slud-
ge residue may result in the bottom protective lid movingly only with great effort. Disconnect the mains
adapter from the socket. Occasionally remove the saw blade, clean the top and bottom protective lids
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dual Saw CS 490 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dual Saw CS 490 in the language / languages: English, German, Dutch, French, Italian, Turkish as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info