810293
37
Zoom out
Zoom in
Previous page
1/40
Next page
37
7.1 Projector & Projector mirror
For an optimum ame picture on the 3D Screen, it is essential that the projector mirror and lens of the projector are clean
and free from stains. For this, observe the following instructions:
Wipe the projector and projector mirror with a clean and dry cloth.
Use a clean microbre cloth for cleaning the lens of the projector. Take a small piece of the cloth and fold it at. Rub softly
with a rotary motion from the centre of the lens to the outside.
When taking the projector into operation, take note of the following:
- Remove the lens cap from the projector when used for the rst time.
- If necessary, focus the projection on the 3D Screen; see section 5.2.1.
7.2 Heating element
Do not touch the ventilator with hard objects, this may cause imbalance.
When the heating element is used for the rst time, odour and smoke may be generated. Vent the
room properly and prevent the vapours from being inhaled.
When taking the heating element in operation, switch to the highest position and allow it to heat for 20 minutes.
7.3 Parts
Components that have to be replaced are available at the supplier.
8. Maintenance
For a proper execution of maintenance, some parts must be disassembled from the appliance. This should be done with
the greatest care to prevent damage to electric and mechanic components as well as visible sections of the appliance.
It is recommended to have the appliance checked, cleaned and, if necessary, repaired once per year by a skilled installer.
It should at least be established that the appliance is working properly and safely. During the annual check, the following
should be considered:
- Dust formation in the appliance, on the projector, projector lens and projector mirror.
- Dust formation in the heating element.
- Quality of the earth connection
- Inspect the voltage on the 3D Screen.
During maintenance, clean the air inlet and convection opening with a vacuum cleaner and a soft brush.
Do not touch the ventilator with hard objects, this may cause imbalance.
Make the appliance fully free from voltage by removing the plug from the socket before you start cleaning the heating
element.
i n s ta l l at i e h a n d l e i d i n ginstallation manual
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Virtuo 80-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Virtuo 80-2 in the language / languages: English as an attachment in your email.

The manual is 3.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Virtuo 80-2

DRU Virtuo 80-2 Usermanual and installation guide - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info