810293
36
Zoom out
Zoom in
Previous page
1/40
Next page
36
6. Final check
For a good and safe operation of the appliance, the following checks must be performed prior to commissioning.
Familiarise the end user with the appliance. Instruct him about using it for the rst time,
the safety measures, how the remote control works and the recommended annual maintenance.
For more information, see the user manual.
Tell the user to remove the plug from the socket in case of malfunctions/poor operation and contact the installer to prevent
unsafe situations.
Some aspects to consider when explaining the operation and functions of the appliance to the end user:
The end user knows where to nd the main switch of the appliance.
The location of the socket to which the appliance is connected is known to the end user.
Precautions against unintended activation of the appliance by other infrared
remote controls, such as for television and radio, are familiar to the end user.
The remote control and its functions have been explained to the end user.
The end user knows that a chimney breast with plastering should dry for at least 6 weeks before the heating element can
be used.
Cleaning the exterior of the glass panes has been explained and/or demonstrated to the end user.
The manual has been handed over to the end user and is stored with the appliance.
7. Delivery
- Make sure there is no voltage on the appliance during maintenance work.
- Make sure the appliance has cooled down to room temperature and has been made free from voltage before maintenance
is started.
- Only the original self-tapping screws, bolts and other fasteners may be used, as they ensure the appliances earthing.
- Only clean a glass pane once it has reached room temperature.
- Do not deliver the appliance when a glass pane is broken and/or cracked. Replace the glass pane.
- Always perform a nal check prior to the moment of delivery.
- Avoid damage to the glass pane(s).
- Make sure the electronics are not damaged by static electricity.
Inspect the voltage on the 3D Screen.
Inspect whether the projector mirror and lens of the projector are clean and free from dust.
Clean the glass pane(s) (if necessary).
installation manual
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Virtuo 80-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Virtuo 80-2 in the language / languages: English as an attachment in your email.

The manual is 3.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Virtuo 80-2

DRU Virtuo 80-2 Usermanual and installation guide - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info