528137

DRU GLOBAL 70 Manual

35
Zoom out
Zoom in
Previous page
1/60
Next page
English
33
INSTALLATION MANUAL
Global 70 / 70 XT
A number of components are placed in the control box,
such as data plate, gas control, receiver belonging to the
remote control.
Proceed as follows, when placing the control box; see fi g. 4
for details:
• Make an opening in the chimney breast of 285 x 194 mm
(h x w).
• Place the inner frame (1); unscrew bolts (5) for this.
!Tip - When the chimney breast is made of
bricks, the inner frame can be built with
bricks at the same time;
- When using a different material, you can
glue the inner frame or fi x it with four
fl ush screws.
• Mount the gas control to the brackets of the inner
frame (2).
• Reconnect the pipes to the gas control.
- Avoid kinks in the pipes;
- Place the aluminium pilot burner pipe
free from the fl oor and / or the wall;
- Tighten the fl exible gas pipe and the pilot
burner pipe until they are gastight.
• If applicable, connect the wires of thermocouple 1 to the
gas control; see fi g. 5.
- First tighten the thermocouple by hand
and;
- then tighten it a quarter turn using a
suitable spanner.
• If necessary, blow clean the gas pipe.
• Connect the gas pipe to the gas tap.
• Bleed the gas pipe.
• Place the receiver (3); for connections, see section 7.1.
• Place the data plate (6).
• Fix the outer frame with door (4) to the inner frame
using 2 socket cap screws.
!Tip You can place the outer frame in such a
way, that the door turns to the left or to
the right.
• If necessary, mount the control panel of the Max vent
system in the control box; see the manual for the Max
vent system.
6.8 Adjusting the appliance
The appliance has to be set in such a way that it works cor-
rectly in combination with the concentric system.
For that purpose, a baffl e is placed and/or the air inlet guide
is removed. The conditions for using a wall terminal are
described in section 6.5.2.1, and for using a roof terminal in
section 6.5.3.1.
6.8.1 Baffl e (R)
The baffl e (R) is supplied separately.
This is mounted as follows (see fi g. 6):
• Place the baffl e.
• Use the template supplied to set the distance of the
restriction (see fi g. 7).
• Fix the baffl e by using the self-tapping screw (U).
6.8.2 Air inlet guide (L)
The air inlet guide (L) is located at the bottom side of the
tray (M) surrounding the burner.
If you want to remove it, proceed as follows; see fi g. 8:
• Unscrew the self-tapping screws (O) and remove them.
• Take the tray surrounding the burner out of the appliance.
• Unscrew the self-tapping screws (N) and remove them.
• Remove the air inlet guide.
• Fit the tray surrounding the burner back in the appliance.
6.9 Placing the wood set
The appliance is supplied with a wood set.
Strictly observe the following instructions
to prevent unsafe situations:
- only ever use the supplied wood set;
- place the wood set exactly as described;
- make sure the pilot burner and the space
around it are kept free from objects
(see fi g. 9);
- make sure that thermocouple 2 and the
space around it are kept free from
objects (see fi g. 10);
- make sure that the slot between the
burner tray and the tray surrounding the
burner is kept free from objects;
- make sure there is no vermiculite’s fi ne
dust on the burner.
6.9.1 Wood set
The wood set consists of black vermiculite (see fi g. 11),
chips (see fi g. 12) and four logs.
• Fill the burner tray with vermiculite; equally spread the
vermiculite.
!Caution - You can infl uence the fl ame image by
moving the vermiculite, yet
- the burner deck has to remain covered
with vermiculite in order to prevent that
the life expectancy of the burner is
reduced.
• Identify logs A up to D by using fi g. 13a.
!Tip Use the burn stains on the logs for identi-
fi cation.
• Successively place log A (rear log), log B (middle log) and
log C (right log); see fi g. 13b to 13h.
Caution
Caution
Caution
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU GLOBAL 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU GLOBAL 70 in the language / languages: English, Dutch as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU GLOBAL 70

DRU GLOBAL 70 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info