Manual DRU Diablo Next (page 14 of 36) (English)

571631

Zoom out

Zoom in

1/36

English

INSTALLATION MANUAL

5.12Woodset

The appliance is supplied with a wood set.

!Caution

Strictly observe the following instructions to prevent unsafe situations:

• only ever use the supplied wood set;

• place the wood set exactly as described;

• make sure the pilot burner and the surrounding space remain free (see Appendix 3, fig. 15);

• make sure thermocouple 2 and the surrounding space remain free (see appendix 3, fig. 16);

• make sure the slot between and around the burners remains free;

• make sure that the vermiculite’s fine dust does not get on the burners.

5.12.1Woodset

The wood set consists of vermiculite (see Appendix 3, fig. 17), chips (see Appendix 3, fig. 18), glow material (see

Appendix 3, fig. 19) and a number of logs.

Fill the burners with vermiculite; spread the vermiculite evenly (see appendix 3, fig. 20). The vermiculite may not

get higher than the edge of the burners.

!Caution

• You can influence the flame picture by moving the vermiculite,

• but the burner decks have to remain fully covered with vermiculite in order to prevent reduction of the

burner's life span.

Identify logs A to D (see Appendix 3, fig. 21).

!Tip

Use the burn stains on the logs for identification.

Place log A against the corresponding positioning cams (see Appendix 3, fig. 22);

Place log C on the appropriate bracket (see Appendix 3, fig. 23);

Place log B against the appropriate bracket (see Appendix 3, fig. 24);

Finally, place log D on log B (see Appendix 3, fig. 25);

Fill the vermiculite tray with chips; spread the chips evenly (see appendix 3, fig. 26);

!Caution

Do NOT place chips over the slot, around the burner.

If required, spread the glow material over the burner.

!Caution

Keep thermocouple 2 free from glow material

!Tip

Fasten the glow material under the logs

!Caution

The logs should not completely cover the burner pattern, because:

• the main burners will not ignite properly; which could result in unsafe situations;

• the appliance will become filthy more quickly, as a result of soot;

• the flame picture will be affected.

5.13Mantelpiece

!Caution

Proceed carefully and observe the instructions in order to prevent damage to the mantelpiece and/or other parts.

!Tip

If applicable, see Polo installation manual for additional information.

5.13.1Placingthemantelpiece

The mantelpiece consists of two parts, the mantelpiece (K) and the cover plate (J).

When mounting the mantelpiece, proceed as follows:

Hold the mantelpiece (K) straight in front of the appliance (see Appendix 3, fig. 13).

Now carefully slide the mantelpiece over the appliance.

!Caution

Make sure you make no contact with the glass, in order to prevent scratches.

Hook the mantelpiece behind the top edge of the wall plate (B).

Now place the cover plate (J) on the mantelpiece (see Appendix 3, fig. 14).

5.13.2Removingthemantelpiece

Removing the mantelpiece will take place in reverse order of the placement described above.

!Caution

• Proceed carefully and observe the instructions in order to prevent damage to the mantelpiece and/or other

parts.

• Make sure you make no contact with the glass, in order to prevent scratches.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DRU Diablo Next in the language / languages: English as an attachment in your email.

The manual is 4.59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Diablo Next

DRU Diablo Next User Manual - English - 20 pages

DRU Diablo Next Installation Guide - German - 36 pages

DRU Diablo Next User Manual - German - 20 pages

DRU Diablo Next Installation Guide - Dutch - 36 pages

DRU Diablo Next User Manual - Dutch - 20 pages

DRU Diablo Next User Manual - Dutch - 16 pages

DRU Diablo Next User Manual - French - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DRU Diablo Next Manual

Product: