571631

DRU Diablo Next Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
English
INSTALLATION MANUAL
5.9Additionalinstructions
!Tip
It will be easier to reach the gas control, if you remove the mantelpiece.
5.9.1Placingtheappliance
!Caution
• The temperature of the wall behind the appliance may rise up to 60°C. This should be taken into account
when selecting the wall and wall covering.
• A minimum free space of 100 mm space should be maintained below the appliance.
• At both sides and above the appliance, a free space of at least 500 mm should be maintained
(see Appendix 3, fig. 2.).
When placing the appliance, take the following aspects into account:
Ø
Firmly attach the wall plate (B) to a solid non combustible wall using four bolts (see Appendix 3, fig. 5A);
!Caution
The wall plate (B) must be level.
Ø
Carefully suspend the appliance (T) from the wall plate (B) (see Appendix 3, fig. 6).
5.9.2Gasconnection
Ø
Provide a gas connection (G3/8”) on the correct location (see Appendix 3, fig. 5B, 5C).
!Caution
Use for G20/G25/G25.3 fig. 5B and for G31 fig. 5C.
Ø
Make sure there is no dirt in gas pipes and connections;
• Connect the gas pipe to the gas tap.
• Bleed the gas pipe.
5.9.3Placingthereceiver
The appliance is equipped with an electronic ignition through the remote control. The receiver must be placed in
the appliance. Follow the procedure described below:
Ø
Place the receiver in the receiver tray (see Appendix 3, fig. 7).
Ø
Connect the receiver to the appliance according to the instructions in section 6.1.
5.10Glasspane
!Caution
• Avoid damages when removing/placing the glass pane.
• Avoid/remove fingerprints on the glass pane, as they will burn into the glass.
5.10.1Removingtheglasspane
For removing the glass pane, you must observe the following steps:
Ø
Remove the mantelpiece as indicated in section 5.13.
Ø
Fully remove the 4 self-tapping screws from the clamp strip and remove the clamp strip (see Appendix 3, fig. 8).
!Caution
Hold the glass pane to prevent it from falling out.
Ø
Now carefully remove the glass pane by tilting the top a little forward and lifting out the glass pane
(see Appendix 3, fig. 9).
!Caution
Make sure the sealing tape at the edges of the glass pane is not damaged during removal.
5.10.2Placingtheglasspane
Placing the glass pane will take place in reverse order of removing the glass pane, as described above.
!Caution
• Avoid/remove fingerprints on the glass pane, as they will burn into the glass.
• The bolts and nuts should not be over-tightened, since otherwise they could break or strip the thread:
tight=tight.
• Check whether the sealing tape is located neatly along the edge of the glass pane.
When placing back the glass pane, take the following instructions into account:
Ø
Slowly slide down the glass pane in its position and allow the glass pane to rest on the lower strip.
Ø
Make sure the glass pane is placed exactly in the middle of the appliance and neatly connects to the side panes.
!Caution
• Continue to stop the glass pane in the middle, so it does not fall back.
• Place the glass pane with the logo at the bottom right.
12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Diablo Next at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Diablo Next in the language / languages: English as an attachment in your email.

The manual is 4.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Diablo Next

DRU Diablo Next User Manual - English - 20 pages

DRU Diablo Next Installation Guide - German - 36 pages

DRU Diablo Next User Manual - German - 20 pages

DRU Diablo Next Installation Guide - Dutch - 36 pages

DRU Diablo Next User Manual - Dutch - 20 pages

DRU Diablo Next User Manual - Dutch - 16 pages

DRU Diablo Next User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info