Manual Drive Multitec (page 18 of 52) (English, German, Dutch, French, Italian)

801303

Zoom out

Zoom in

1/52

Instructions for use MULTITEC

Drive Medical GmbH & Co. KG | As per: 24.04.2020 | Errors and alterations excepted

Seat depth

Take the leg supports o

and remove the seat

cushion. Loosen the faste-

ning screws (1) beneath the

seat surface. Pull the enti-

re front section out until it

stops.

Retighten the fastening

screws securely. Repositi-

on the seat cushion on the

seat surface.

Length of lower leg

The adjustment is cor-

rect if, when your feet are

placed on the foot plate,

your thighs are placed hor-

izontally.

Loosening the hexagon

socket screw enables you

to simply change the low-

er leg length. Retighten the

hexagon socket screw af-

ter the adjustment.

Calf pads

The calf pads can be ad-

justed both in height and

depth.

Height (pic. 18):

To adjust the height of the

calf pads as desired, ﬁrst

loosen the hexagon sock-

et screw. You can now

change the position of

the calf pads upwards or

downwards. The refasten

the hexagon socket screw.

Depth (pic. 19):

The depth of the calf pads

can be adjusted with a few

maneuvers. Loosen the

hexagon socket screw and

bring the calf pad into the

desired position. Then re-

tighten the hexagon sock-

et screw.

Steering wheels

The height of the steering wheels can be changed in

three steps.

Danger of tipping!

By adjusting the height of

the steering wheels, the

danger of tipping forward

increases under certain cir-

cumstances. Remove the

screw of the wheel axle

and remove the axle.

Mount the wheel at the desired height and screw the

screw back in.

Using your multifunction wheelchair

Seat and back angle

The seat unit and the backrest angle can be continuously

adjusted with the aid of a pneumatic spring. When adjust-

ing the seat and backrest angle, hold the push handle

securely with both hands. Otherwise, there is a danger of

tipping. The adjustment can only be done under the load

of the user.

Adjust seat and back angle

To prevent the wheelchair from rolling o unintentionally,

ﬁrst activate the parking brakes.

Hold both push handles securely with your hands.

Press the left lever for continuous adjustment of the seat

angle (pic. 21).

Press the right lever for continuous adjustment of the

back angle (pic. 22).

To perform the desired seat and back angle adjustment,

press the push handles either upwards or downwards.

Release the lever in the desired position. Check the cho-

sen position for stability.

Leg supports

Raising the leg supports:

To raise the leg supports,

loosen the star screw and

push the leg supports into

the desired position. Then

retighten the star screw

(pic. 23).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Drive Multitec in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 12.59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Drive Multitec Manual

Product: