801301

Drive Litec 2G Plus Manual

20
Zoom out
Zoom in
Previous page
1/52
Next page
20
Instructions for use LITEC 2G PLUS
Drive Medical GmbH & Co. KG | As per: 11.05.2021 | Errors and alterations excepted
EN
To facilitate transferring into and out of the wheelchair,
the operating lever of the parking brake can be folded
down. (photo 27+28). To do this, pull the lever upwards
and then fold it down.
Adjusting and using
the hand brake (optional)
Upon delivery, the optio-
nal hand brake is correctly
adjusted for the attendant.
If braking is insuffi cient,
this can be increased by
unscrewing the adjusting
screw and decreased by
screwing in the adjusting
screw (photo 29).
For adjustment, fi rst remove the locking nut and then
perform the corresponding adjustment; thereafter re-
tighten the locking nut and in doing so, use pliers to hold
the adjusting screw. To brake the wheelchair by the at-
tendant, pull up both brake handles at the hand grip.
To apply the brakes (such as for parking), you can lock the
brake handle in the braking position by simply pushing
the locking mechanism forwards with your fi nger until it
snaps into place; to unlock, push the locking mechanism
back (photo 30+31).
30 31
If you need to step away from the wheelchair while it is
occupied, it is essential to additionally apply the parking
brake.
Operating the tilting aid
To maneuver around
curbstones and over
thresholds step fi rmly
(with the left or right foot)
on the tilt aid while simul-
taneously pushing down
the handles. This ensures
that lifting the front of the
wheelchair is easier. En-
sure that you are standing
securely (photo32).
Operating the anti-tilt aid
The height of the anti-tilt
support can be adjusted
by releasing the lock (pho-
to 33).
Collapsing
For easier transport or for stowing in motor vehicles, the
wheelchair can be collapsed with just a single maneuver.
To do this, fi rst remove the optional seat cushion as well
as the footrests, then grasp both looped handles loca-
ted at the side of the seat surface cushion and pull the
wheelchair upwards (photo 34+35).
34 35
27 28
29
33
32
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drive Litec 2G Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drive Litec 2G Plus in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info