801301
19
Zoom out
Zoom in
Previous page
1/52
Next page
Instructions for use LITEC 2G PLUS
19
Drive Medical GmbH & Co. KG | As per: 11.05.2021 | Errors and alterations excepted
EN
Reinsert the screws, put on the knurled nuts and tighten
them.
Always ensure that both sides are adjusted identically.
Adjusting and removing armrests
The armrests are alrea-
dy assembled on the
wheelchair upon delivery.
The armrest overlays are
replaceable.
The armrest overlay can
be adjusted as a short or
long arm support as nee-
ded (photo 20).
To adjust, press the spring
button in the middle on
the outside of the armrest
overlay; this can now be
moved into the desired
position (photo 21).
The height of the armrest overlay can also be adjusted;
to do this, press the spring button in the middle under
the armrest overlay and lift it and/or lower it.
The spring button must
lock back into position af-
ter adjustment. Select the
closest position, if neces-
sary.
To swivel the armrest
backwards, engage the release lever at the front of the
arm rest and hold it down it while simultaneously pulling
the armrest up until the armrest is free. Now it can be
swiveled backwards (photo 22).
Adjusting and using the parking brake
Upon delivery, the parking brake is correctly adjusted
according to the confi guration status. If you have made
changes to the wheel position, the brake adjustment
may need to be changed.
To do this, remove both screws on the underside of the
respective brake (photo 23) and push the complete unit
onto the guide such that there is a distance of 10 mm
between the brake bolt and the tire (photo 24). Retigh-
ten both screws and the parking brake is now optimally
adjusted.
Ensure that all screws are reinserted and tightened!
To use the parking brake, press the brake lever fi rmly
from the front until it noticeably clicks into place – the
parking brake is now engaged (photo 25).
To release, pull the brake lever towards you and the par-
king brake is unlocked (photo 26).
Always ensure that the parking brake is locked by att-
empting to move the wheelchair.
25 26
23 24
20
21
22
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drive Litec 2G Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drive Litec 2G Plus in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info