768206
36
Zoom out
Zoom in
Previous page
1/52
Next page
13.0 CINEMASCOPE SETUPS
36 R699820 - Yunzi Series User Manual
13.0CINEMASCOPE SETUPS
13.1 Lens Zoom or Theater System Kit
The Yunzi Series centralizes the controls and automation commands for a unique, versatile and unexpectedly
simple to operate 2.35:1 theatre experience using Lens Zoom or Anamorphic Lens.
Up to 10 lens position memories
Integrated Constant Image Width (CIW) scaler with anamorphic mode A and mode B.
Dedicated commands to control the Theater System Kit and picture size on a 2.35:1 screen.
13.2 Cinemascope setup with Lens Zoom
Select “Menu
Installation
Lens Memory 1”
Zoom in, until the left and right borders of the picture fits the 2.35:1 screen borders. Save the lens position in the
lens memory 1. You can also edit the memory 1 name to “Cinemascope”.
Select “Menu
Installation
Lens memory 2”
Make sure to project a 16:9 picture, zoom out until the picture top and bottom fit the top and bottom of the screen.
Adjust the focus and offset if required, then save this position into the memory 2. You can additionally edit the
memory name to “Standard”.
Switch format using the Remote Control Unit.
You can now switch between Cinemascope and standard formats easily by using the [Lens Mem]ory button on the
RCU and selecting the correct lens memory according to the source format.
13.3 Installing a 2.35:1 screen with the Theater System Kit
Plug the 12V Trigger output of the projector to the Anamorphic motorization
Connect the lens motorization to the 12V Trigger output
Configure into Function “Menu
Trigger
On (Anamo)”
The “Function
Trigger” menu determines the 12V Trigger output located in the panel input at the rear of this unit.
This is a global parameter (for all inputs. Set the 12V Trigger to “On (Anamo)“ mode so that it is most of the time Off
and switches On when the picture is in Cinemascope format and Anamorphic mode A is selected. The picture is
then vertically stretched and the lens is needed.
Set 12V Trigger to: “Function
Trigger
On (Anamo)”.
Video source is 16:9: set [Anamo]rphic to Off
When you select a 16:9 input choose the anamorphic OFF to obtain move the anamorphic lens out. Menu
“Installation
Anamorphic
Off
12V Trigger
to anamorphic
motorization
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Yunzi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Yunzi in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info